Want this question answered?
a motor
Connect the green wire to the ground terminal, the white wire to the neutral terminal, and the black wire to the hot terminal on the compressor motor. Make sure to follow the manufacturer's instructions and safety guidelines when wiring the power cord to the motor. If in doubt, seek the assistance of a qualified electrician.
because the hermatic compressor motor must be compatible with the refrigerant and oil circulating in the system.
No
series
Different motor windings in the compressor: Common, Start, Run
Ask your teacher. This is a no brainer...
No
No
MOST LIKELY A COMPRESSOR SHORTED TO GROUND IF 3 PHASE. COMPRESSOR START PARTS OR SHORTED COMPRESSOR- SINGLE PHASE. COULD ALSO BE CONDENSER FAN MOTOR OR CAPACITOR ASSUMING IT STARTS WITH THE PRIMARY COMPRESSOR. WITH POWER OFF, CHECK WITH OHMMETER EACH COMPRESSOR LEAD TILL YOU FIND SHORT (LOW RESISTANCE READING). IF THREE PHASE, IT IS POSSIBLE TO REVERSE MOTOR DIRECTION IN AN ATTEMPT TO FREE UP A FROZEN COMPRESSOR (RECIP ONLY, NOT FOR SCROLL IN THAT THEY ARE ROTATION SPECIFIC). ONCE YOU GET IT GOING OR HAVE COMPRESSOR REPLACED, FIND OUT WHAT CAUSED FAILURE AND FIX IT. IT WILL JUST HAPPEN AGAIN IF YOU DON'T. THEY DON'T JUST WEAR OUT IF MAINTAINED PROPERLY. lc
Running from a compressor, a pneumatic motor. Others use electric or petrol motors.
there is a possibility that parts of motor windings has partial damage.