Wiki User
∙ 12y agoWant this question answered?
Be notified when an answer is posted
To change the bike on a Suzuki Bandit 600,Turn on the bike,Hold the 'select' and 'reset' button until the minutes start flashing (~4-8 seconds),Press the 'reset' button until you reach the desired minute reading,Press the 'select' button to switch to the hour,Press the 'reset' button until you reach the desired hour reading,Finalize by pressing the 'select' button.Nice and easy...EZMAIA.com
Turn on the bike,Hold the 'select' and 'reset' button until the minutes start flashing (~4-8 seconds),Press the 'reset' button until you reach the desired minute reading,Press the 'select' button to switch to the hour,Press the 'reset' button until you reach the desired hour reading,Finalize by pressing the 'select' button.
To set the time on a AW61790W watch, start by pressing and holding the "Set" button until the seconds start blinking. Use the "Mode" button to switch between hours, minutes, and other settings. Use the "Adjust" button to change the values. Once you've set the time, press "Set" again to confirm.
No.
when you press the start button and hold it for 6 seconds, the computer will shut down.
Dodge does not use inertia/reset switches.
no there is not one
For Maintenance Required warning light on 2008+ Highlander Hybrid: Start from car in OFF mode. Keep foot off brake pedal, press START/STOP botton twice, reset odometer A & B. While in odometer A, press & hold odometer reset button and simultaneously press START/STOP button to turn off. Press & hold odometer reset button and simultaneously press START/STOP button twice. Wait for the indicator bar to complete reset cycle and then release odometer reset button.
Hit the start button and tap on the cog icon. There should be a button that says "Reset Data". Hope this helped.
To set the clock: 1. Push the "SELECT" button and "RESET" button together for at least two seconds. 2. When the hour digits start flashing, push the "RESET" button to set the hour. 3. Push the "SELECT" button, and the minutes digits will start flashing. 4. Push the "RESET" button to set the minutes. 5. Push the "SELECT" button and then release it to start the clock.
To reset the oil change light on a Ford f150 you start by pressing the button on the dashboard. After you press the button on dashboard, it will start to cycle through liquid level checks, such as fuel level. When it gets to the oil, press and hold the reset button.
click on start then restart