There a 2 types to my knowledge. One is the T-rex which is not so muc a motorcycle as it is a 3 wheeled race car due to the sit down position. The other type is the Can-am made by Bombardier. Both are built in Quebec Canada.
A motorcycle has two or three wheels.
Basically you can, only if the two astride wheels are up front. If the two wheels are in the back, then it becomes a trike and subject to motorcycle regulations.
A motorcycle has two or three wheels.
A bicycle or a motorcycle.
a motorcycle =)
There is a prototype motorcycle, showcasing a Dodge Viper engine, that has two wheels in the front, and two in the back. This is not a production run yet. There are also three-wheeled "bikes", like the T-Rex, that have a two-wheel axle in the front, and a motorcycle-style single wheel in the back. Some home builders have taken an easier way out along the lines of the Trike. Instead of replacing the entire rear end of the motorcycle, they simply add two more wheels to the rear by welding a brace on either side of the original rear tyre. What they end up with is a motorcycle with one front wheel and three rear wheels. The three rear wheels are all in continuous contact with the ground and have their axels in line with each other.
Pch answer is: Two
Is called a motorcycle.
there are 2 wheels on a motorcycle.Motorcycles historically have two wheels, however motorcycles often referred to as trikes are commonly available that have three wheels
They have a different number of wheels is the obvious one.....(Motorcycle has 2 and a car usually has 4 but can have 3 in a Reliant Robin's case.ANS2:Depending on the jurisdiction, a motorcycle is often defined as having three or two wheels. A motorcycle with tandem front wheels can blur that distinction if you put a side car on it. In such cases, the jurisdiction may give you an option in how you register it. There are some cars, going back to the BMW Isetta, with only three wheels that can be registered as cars.
A two wheeled vehicle is one that has two wheels. A bicycle, motorcycle, moped, segway... etc
The person who makes the wheels for Chevrolet is JC Whitney. This company makes wheels for Chevrolet because these two companies have a corporate partnership.