answersLogoWhite

0


Best Answer

1994

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What year did they change polaris scrambler from 2stroke to 4stroke?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How much oil in a 1999 polaris scrambler 500?

2 quarts with filter change


How do you change oil on a 1995 Honda foreman 400 four wheeler?

it is simple, it is right below the head of of the atv. On a polaris scrambler it is right in front of the left rear fender


Do you need to change the oil on your polaris 4 wheeler with a 2 stroke engine?

It depends on a trailblazer 250 they have no crankcase oil but on a 400 water cooled scrambler they do so yes you need to change the oil with regular motor oil


Polaris 01 500 scrambler been submerged changed fluids idled for about 10 min changed oil again now won't start did backfire a few times?

change plug and look for cracks in the head also check the carburetor for moisture


Why does the oil light come on for a polaris 400 scrambler when ideling?

Low oil pressure at idle. Can be idling to low, weak oil pump, defective oil pressure sending unit, or filter is not compatible. Change to another brand of filter and see if you still have the problem.


Change starter on polaris ATV?

How do I replace the starter on my polaris 250 4x4 Model number is EC250PF00802151. How do I change the stater on a 99 polaris explorer 4x4


How do you change front brakes on a polaris sportsman 500?

how do i change front brake pads on my 2002 polaris 500 sportsman


Does Polaris seem to change positions throughout the year?

No, Polaris is always in the same spot in the sky.


How does the altitude of Polaris change with latitude?

the altitude of polaris is same as the latitude of your location assuming that you are in the northern hemisphere


How do you change the head gasket on a 1997 polaris scrambler 400 4x4?

Drain the coolant, remove the six nuts on top of the head. Remove the head and take off the old gasket. Clean both surfaces and put the new gasket on. Put the head on and tighten the nuts down in a crisscross pattern. I think they get torqued to eighteen pounds.


How do you check oil in yz 250?

You can't chaeck the oil level in a newer 2stroke you have to just change the oil and put the right amount back in it.


How do you change the water cooler on an polaris Indy?

Buick, BMW