The first Honda Goldwing with fuel injection was the 1985 LTD model produced until 1987. When the Goldwing engine was enlarged to 1800cc in 2001 then that model and all susequent models had fuel injection.
The 1987 Honda Accord fuel relay switch is attached to the fuel injector pump. The fuel injector pump can be located on the top of the engine near the back.
Go Down to your local part store and by the best fuel injector cleaner for your car.
Just under the Fuel Rail. The Fuel Rail is between the Intake Manifold and the Engine Head.
The fuel control cutoff unit, in your 1986 Honda Accord, is located on top of the fuel injector pump. The fuel control cutoff unit is contained in a sealed box.
Have the cold start injector checked
take the old one off then put the new one on.
Not sure what you are referring to. There is no distinctly separate warning light specifically for the the fuel injection system.
Main relay under dash solder joints went bad
Where is the fuel injector located?
If I'm not mistaken, it's just like checking fuel injectors on any other vehicle. You have to know what the resistance is (Honda should be able to give you the specs) remove the connector to the injector, take a multi-meter and set it for "ohms" and put the two probes on the contacts of the injector and you should get a resistance reading, if the reading is not within the manufacturers specs then it's a bad or weak injector. Hope this helps, its the best i can do.
The fuel injector provides the fuel. The spark plug provides the fire.
The year that fuel injection did become standard on Honda cbr is in the year of 2001 and has been used ever since then including today and probably in the future.