0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Spark plug gap for a 1970 3hp Briggs and stratton engine?
The thickness of a cardboard from a cigarette box.
Why does my 3hp Briggs and stratton motor clutch slip how do you stop it?
not sure. i want to know too. What is this on? need more info.
What is the shaft size on a Briggs and Stratton 3hp horizontal engine Model 80332 Serial F-684109?
5/8 inch
What is the compression of a 3hp Briggs and Stratton engine?
Briggs and Stratton does not release specific compression values. Anything above 120 psi should be just fine, around 90-100 and you're most likely due for a rebuild. A better test is a leakdown test, with can help in determining where compression is being lost.
Torque specs 3hp Briggs and Stratton?
Three specs are considered critical; the connecting rod cap at 110 in-lbs, the sump cover at 110 in-lbs and the cylinder head at 165 in-lbs.
How much compression should a 3hp Briggs have to run properly?
My daughters mini bike with a 3hp Briggs has 80psi compression and runs great. A motor I got "running" off eBay has 55psi compression, runs but has NO power. -Jason
A repair manual for a Briggs straton AT 3600 3HP lawnmower engine where would you look online for it?
B&S site
Towing capacity for the 1989 Chevy s-10 with the 4.3L v-6 and 700r4 transmission?
less than a 3hp Briggs and straton
What size spark plug fits a Briggs and stration 4.5hp motor?
It is usually a Champion plug RJ19LM. The gap is .030 inches. This plug is usually used with B&S engines from 3hp - 6hp.
Is there a difference in a Johnson 3hp motor and a Johnson 3hp seahorse?
i gota three 3hp seahorse johnson boat motor i need to get to head how does everthing come apart
What is the best grade of oil to use on a 3hp Briggs and stratton lawn edger?
Use a straight 30wt oil of your choice. It does depend on if it is the old flat head valve engines, or the new over-head valve engines, which is because of the new EPA laws....all flat heads use 30 hd... the over-head valve engines 10-w30, although prefrence is your own, Briggs & Strattons oil is actually Mobil 1, ( I seen that when I toured Briggs & Strattons factory while working for Central Distributors of Briggs.) Briggs & Stratton recommends the use of SAE 30w detegent oil with an automotive rating of "SJ" or higher when ambient air temperatures are 40 degrees or higher. Under 40 degrees it is acceptable to use a 10w-30 or 5w-30 depending on the weather, but air cooled engines run hotter than liquid cooled so check and change oil frequently. It is also acceptable to use a SYNTHETIC 5w-30 oil year round, but the oil must be changed as often as regular engine oil.
How do you change the oil in a 1967 3hp evinrude outboard motor?
How do you change the oil in a 1967 3Hp Evin-rude outboard motor?
