32:1 gas to oil mixture
It would be wise to.At 32:1 ratio
Yamaha Blasters take unleaded gas only.
The blaster 200 is a 2-stroke, therefore you need to mix the gas and oil, trying running a 50:1 ratio, 50 parts of gas to one part of oil.
The oil to gas ratio will be 25:1, but if i remember correctly they are fitted with a autolube pump, unless its been disconected. Remember: 25 parts gas to 1 part oil.
for every 9.2 litters of gas add 16 ml of 2 stroke premix oil wich is 32-1
use decent two-stroke oil, check the container, but 50 to 1 is good
on the gas line between the gas tank and carb but it might not have one
Yamaha's Yamalube, 2 stroke oil is a good choice.
you can use pretty much any unleaded gas but it runs a little better on 89 octane , or higher but if you have a stock blaster you can run 87 octane
It is best to just do it your self trust me,but 32.1
You don't. You can remove pump and pre-mix the gas.