No the pull chord will not cause the pull cord to be tight. The coil on the lawn mower will cause the compression to be tight.
get a new one
Check the underneath of lawn mower for grass built up.
Try pulling out the spark plug and clearing the cylinder
You can start it by using the pull cord, just be sure the key is in the ON position.
no the pull cord could froze see if the flyweel itself moves if it doesnt then yes it is locked
There is a small cord on the mower. DO not put your stylus directly on the loop at the top of the cord. Put your stylus at the tip of the arrow pointing to the cord. You may have to pull several times before getting the lawn mower to start. Hope this helps you.
I would start with the pull cord rapped off the recoil pulley, flywheel brake if you have one jambed, oil in cylinder pull spark plug and try to pull over or it could be some thing rapped around the blade. hope this helps
It depends on if you bought a pull start mower or a power mower. The pull start mower will have a handle you have to pull hard to start it. The power mower should have a button that simply turns it on. Make sure there is gas in the pull start mower.
no
Electric mowers do not have pull cords.
you pull on it:) lol jk i have no idea