0
How much oil do you need in a 1985 Honda Goldwing front forks?
Wiki User
∙ 15y ago
That would be 345cc or ( 11.7 oz ) Be sure equal amount in each fork.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you change the headlight in a 1985 Honda Goldwing GL1200 Aspencade?
How would you change the headlight bulb in a 1987 Honda goldwing? GL1200
How do you bleed the rear breaks on a 1985 Honda goldwing?
The rear master on the Goldwings controls both the rear caliper and one of the front calipers . I think it is the right. bleed the front right first then the rear Hope this helps.
How much air do i put in the forks on a 1985 honda shadow vt 500c?
22psi
What is oil capacity for 1985 Honda goldwing?
3.2 Liters or 3.4 U.S. quarts. That is with the oil filter changed also.
Will a 1984 1200cc Honda goldwing engine and transmission match a 1985 aspencade?
1984 to 1987 same engine same bike.
What year did fuel injector became standard in Honda gold wing?
The first Honda Goldwing with fuel injection was the 1985 LTD model produced until 1987. When the Goldwing engine was enlarged to 1800cc in 2001 then that model and all susequent models had fuel injection.
Can a reverse be put onto a 1985 Goldwing Aspencade?
A reverse gear can be added to a 1985 Goldwing Aspencade. It is best to have it done at a specialty shop that works with older Goldwing's.
What kind and weight of oil is best for a 1985 1200a goldwing?
I use Motul 10w40. Good for the engine, clutch and stator. Check with your Honda dealer.
How do I get to the spark plugs on a 1985 Honda goldwing GL1200L?
Remove the chrome cover, pull out the plug cable, use the spark plug socket with a ratchet.
Where is the horn in a 1985 Honda Accord?
the horn is in front of the radiator.
Where is the slave cylinder and bleeder valve on 1985 Honda goldwing?
Look at the back of the engine where the clutch line goes in the engine. 3 bolts to take out and it's in your hand.
How much fork oil does a 1985 atc 250r take?
How much fluid in the front forks of a 1985 atc 250r take. I am changing the fork seals
