Most modern mowers are of the rotary type. Rotary mower engines are all made to spin at 3,600 revs per minute when not under load. During cutting, the rpm drops to between 2800 and 3300. There is a simple wire-based device for measuring rpm on a running mower, which all mower specialists would own.
The other speed linked with your question could be that concerning the velocity of the blade tip as it revolves. As the centre of the blade is spinning at 3600 rpm, an 18 inch blade tip will travel through the air at one speed a 21 inch at a faster speed and so on. Rotary mower blade bars are made up to a max of 24 inches.
if the blade is still able to spin around alright than you have to take the blade off and then attach what was spinning the blade and attach it to the tire somehow so that it spins the bike tire instead of the blade.
There is no such bowling style as 'fast in spin' or 'fast out spin in'.
Its yours how should we know?
If the blade hits you in the head. Lol. What a funny questions. Can the electricity the produce kill you? Sure, if its big enough. Can the blades kill you when they spin? Sure, if they spin fast enough. Just like everything in life, if its moving fast enough - it will kill you ;)
Fast
Fast Japanese Spin Cycle was created in 1994.
A figure skate can spin because there are two "edges" on your blade. an inside edge and an outside edge. that is what helps you spin : )
To make spin steal, you need a blade with a low center of gravity and high rotational inertia. This allows the blade to maintain its spinning momentum when making contact with an opponent's blade, effectively stealing its rotational energy. Proper timing and angle of attack are also crucial for successful spin steal.
No they spin very very fast
they spin and move fast
round. so that they could spin fast
Press and keep hold of the run fast button (Y)and quickly jump(B) and press down if your running fast enough you should turn in to the shell and spin