To set the idle, adjust the carburetor.
Idle is set by the computer.
the correct oil mixture is 40 to 1 or if you want you can mix to 50 to 1
My son has a 2005 Blaster set up for racing. We usesynthetic gear case oil. That's how its labled on the quart bottle on oil weight on it. Dont use regular car motor oil because it does not lub clutch correctly.
Best Yamaha acoustic drum set - Yamaha Phoenix Best Yamaha electronic drum set - Yamaha DTX950K
how to set Yamaha pw80 carburetor
you don`t its a two stroke as long as the key is in the flywheel that's it you don`t have valves like a 4 stroke you have reed valves which don`t get timed with the crank
you need to adjust thecarburetor it will tell how in the owners manual.Also the adjustment for the idle is a gold colored knob that sticks out on the left side of the atv(clutch side),Idle mixture screw is in the middle of the carb under the intake side of the carb(hard to get to)(venturi)side
Does it idle high all the time or just for a bit after you start it? There are a couple things you could check such as: 1- Defective throttle cable 2- Idle srew on you carburator is set too high 3- Choke is on Good Luck!
Idle is automatically set by the computer with the use of an idle motor.
i need to find out how to set the timing on a Yamaha xt 500
JET,MAIN #230137-14143-46-A1NEEDLE SET #2XJ-1490J-00-00At idle needle needs to be fully seated. The needle set consist of needle, clip, slide, retainer screw.