0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
You have 2003 police road king what mounts are needed to put on a outer fairing from a 2000 through 2006 electra glide standard outer fairing only do not want inner fairing can this be done?
To install an outer fairing from a 2000-2006 Electra Glide Standard onto a 2003 Police Road King, you will need to purchase a fairing mounting kit specific to your bike model and the fairing year range you mentioned. Ensure that the mounting kit is compatible with both the Road King and Electra Glide fairing. It is possible to install the outer fairing without the inner fairing, but you may need to make custom adjustments for fitment. Consider seeking assistance from a professional or a knowledgeable source for guidance during the installation process.
2007 flhx street glide with a broken mirror bracket How is the mirror installed and can it be removed and reinstalled using the mounting screw behind the mirror thanks?
you must remove the outer fairing,remove headlight ring,windshield srews,and four screws from inner fairing,you will seee locator hole and plastic fastener for bracket,installation reverse blah blah blah. RIDE HARD
Is Mortimer Street London inner or outer London?
Inner
How do you replace the inner tie rods on a 1999 Toyota Camry?
replace inner tierod on '99 camray
How replace battery fjr1300?
First step is to remove the screws that hold on the black inner plastics around the clocks and by the tank. Once out remove the plastic rivet type screw directly in front of ignition, under the clocks. Now remove the black inner plastics carefully. Battery is on the right (as you sit on bike) behind the fairing. Now just undo the bolts and slide out. 30min job!!!!!
How do you turn on rear speakers on a ultra classic?
On '06 and later with Harman Kardon stereo there is a toggle switch on inner fairing to left of ignition switch also an internal fader is on the stereo controls themselves
How do you replace tie-rod on a 1997 Dodge Intrepid?
Inner or outer?
How do you tighten the handlebars on a 2003 harley ultra classic?
What I did was... First place something over the spots so you don't scratch the paint on the fairing. Then take the batwing front fairing off: remove the 3 screws for the windshield, then the 4 torx screws, 2 on each side, of the inner fairing; one being up in the handlebar/grip area and the other at the bottom of the fairing by the top of the fork, unplug the headlamp and slide the shell off. Sometimes the windshield stays in place, especially if you a short deflector, but you may want to take this off too to avoid damaging it. Then remove the radio (unplug everything from the back of the radio, then there are 4 thumb/torx screws on the sides of the radio holding this to the bracket frame...they can be fun to remove and install). Once the radio is out you should see 2 of the 4 hex screws where the bracket is holding the bars to the fork (to get to the other 2 I would think you'd have to take off the inner fairing). I only tightened the 2 visible ones enough to keep the bar in place. I really didn't feel like taking the inner fairing off so I got these tight enough (using a hex head socket and a socket wrench). Be careful if you're trying to lower the bar towards the gas tank. If you go too low the fork lock won't work and yo risk hitting the tank with the controls and/or wiring and cabling . Then you go in the reverse order to put it all back together.
How do you removed a tie rod inner for a Pontiac Sunfire?
how do you repair an inner tie rod for a 96 Pontiac sunfire no repair,replace with new.
How do you replace the drivers side mirror without taking off the inner door panel for a 2002 Chevy venture?
how i do replace the drivers side mirror for a 2002 Chevy venture with taking off the inner door panel
Does a high school have to have a campus?
No, many inner-city high schools are just a building on the street.
How do you replace door check arm on 2005 for expidition?
Remove inner door panel and replace complete door check assembly
