Remove 2 screws to remove trim under headlight. Remove both mirrors to allow removal of trim under winsdhield. Remove 2 bolts and trim bracket at bottom of headlight holder. Remove 2 bolts at top, that holds trim bracket and top of headlight holder. Pull out the headlight holder. Unplug headlight electrical plug at rear of bulb. Remove headlight from holder by pulling retaining clips free. Install new headlight, but do not touch with bare hands. Install parts in reverse order. However, top bolts holding each mirror should be started first, then bottom bolts, and tighten evenly.
How would you change the headlight bulb in a 1987 Honda goldwing? GL1200
I have a 1976 Goldwing with faring, it has the chrome cover over the head light, I need to change the light. I can't find a way to get the headlamp out of faring to change it. Please help, P. Cox
With the filter changed 3.5 liters will do.
You will have to start with the basic things. Do you have fuel ? and do you have spark ? check these 2 things first.
Long shot, but try mototourinc.com
Hope this website helps It's the shop manual for the 1987 Honda Accord. http://pauldesign.ru/honda/shopmanual.html
The headlight relay switch on a 1987 Honda Accord looks like a small box. The switch is located underneath the engine compartment fuse box.
1984 to 1987 same engine same bike.
The first Honda Goldwing with fuel injection was the 1985 LTD model produced until 1987. When the Goldwing engine was enlarged to 1800cc in 2001 then that model and all susequent models had fuel injection.
On retractable headlight models raise the headlightsDisconnect the neagative battery cableRemove the retaining screws taking care not to disturb the adjustment screwsRemove the retainer and pull the headlight out enough to allow the connector to be unplugedRemove the headlightTo install the headlight plug the connector in place the headlight in position and install the retainer screws tighten the screws securleyPlace the headlight bezel in position and install the retaining screws
honda transmissions do not have filters
There is a plug on the engine right beside the oil filter. This will drain the engine and rad. Or, just remove the lower rad. hose at the thermostat.