The spark plug is tucked down in the cooling fins of the engine. The plug wire is the only wire going to the top of the motor, follow it down to the plug. Your tool kit has a plug socket that can be used to remove the plug. If you have a hard time try using a deep well socket, 4-6in extension and a breaker bar. If the plug has never been removed then it could be frozen in place. In this case spray a liberal amount of PB blaster or some other penetrating lube on the plug and try it again the next day.
WARNING: Most penetrating lubes, especially PB blaster, are highly flammable. Make sure your engine is cold and disconnect your battery to avoid sparks which may ignite the fluid.
yes
What kind of oil can you use In a Yamaha grizzly ATV
.006
.039-.043
The spark plug gap on a 2000 Kodiak 400 is .024
the gap is .025
Yes. It actually should, the only problem is the motor mounts but i think if you did a little custom mount or something it would.
I think 2000-2002 are welded in.
when do you have to change a spark plug and how many miles when do you have to change a spark plug and how many miles
A diagram of how to change and how many spark plugs are on a 2000 Mercedes e320
0.6 - 0.7 mm gap or 0.024 - 0.028 inch ----
how u change spark plugs on 1998 gmc safari van