The purpose of forward controls is so the rider can have their feet in a more forwardÊposition while riding. The levers for the forward control are attached to the stock pegs.
The controls for RC and normal helicopters are same.Go to options and check your lean forward and lean backward controls.
why would a speedometer and odometer not work on a suzuki motorcycle?
Shift your weight forward while applying the front brake.
This refers to the three basic positions of foot controls; forward (legs straight), mid (legs bent, feetbelow knees) and rear or sport (legs bent past 90deg, feet under buttocks). For example: A V-Rod or Speedmaster has forward controls, a Sportster or Bonneville has mid controls, a Daytona or Ducati have rear or sport controls.
Your brain controls how your muscles work by sending signals.
If you are going to go all stock then yes, otherwise engine mounts, controls and drive components can all have new mounts fabricated to make them work on your custom frame.
The purpose of a motorcycle engine is to propel the motorcycle forward via the gas or diesel engine. The motor of the motor cycle makes it different from other two wheeled vehicles, in that it is self propelled, as opposed to manually powered.
In a similar but more simple way than today. You had an engine or two to move it forward, curved wings to give lift, and all the same controls surfaces. Their main differences were cable operated controls, simpler (if any) radios and much less power.
Squeeze in the clutch and give it just enough throttle to help you walk the bike forward.
You check it with a multimeter and refer to you work shop manual for the correct reading
You kick it and starts!