0
I would not recommend jump starting a motorcycle using a car, unless it's an extreme emergency. Then you do not want the car running, or you could fry your charging system.
*Edit* Actually jump starting a motorcycle from a car battery is absolutely fine - whether the car is running or not. The motorcycle battery will only draw the power it needs from the car battery and won't overload it's own circuits.
I have jumped a motorcyle from car batteries many times, and when we service motorcycles at the roadside that have dead batteries we hook them up to the generator in the van that we also use to start 18 wheelers that are having battery trouble, so its perfectly fine
Add your answer:
Earn +20 pts
How do you jump start a Volvo V70?
To jumpstart a car, firstly you need jumper cables. You will connect the jumper cables to the Volvos battery and connect the other end of the cables to another cars battery and give that car gas to help send a jolt to the Volvo.
Can you jump a motorcycle battery with a car battery?
yes, you can. BUT don't start the car! just connect the jumper cables from car to motorcycle wait 5 minutes and then try to start the motorcycle.
How do you charge a motorcycle battery with a car battery?
You must get a couple of so-called jumper cables. The cables have strong clamps on them and are designed to be clamped to the battery terminals. Attach the black cable to the negative terminals of the motorcycle and car battery first. Then attach the red or positive cable to the positive terminals of the motorcycle and the car battery. In case your motorcycle battery is empty, you can now start the bike from the car battery. Disconnect the cables in reverse order, beginning with the red cable. The motorcycle battery will not be charged much by the car battery but the bike can be jump started by using this method.
Why do IDE harddrives require jumper cables?
They don't. Jumper cables are used to charge a car battery. Hard drives have no use for such a device.
Why can you start a car with a battery outside of the car?
Sure, connect it to the car with jumper cables.
Can electricity from a car kill you?
NO! They use a car battery and jumper cables to torture people.
Why does the car only start when it gets jumper cables?
Bad battery.
How do you disable the alarm in a 1999 montero sport?
Another issue is to disable the alarm when attempting to jumpstart a dead battery. The alarm will come to life and sound when jumper cables are connected to the battery being used to jump the vehicle. The solution is to connect the jumper cables, and while the alarm is sounding, insert the key in the door and manually unlock the vehicle. The alarm will go off, and you can continue to jumpstart the battery. Don't use your key or remote pad, press the lock button from the inside of the car before closing the door.
How do you jump start a dead battery on a 2008 beetle?
You have to have two battery jumper cables. One cable connects to the Bettle battery plus connector and the plus side of the battery in a (engine running) jumpstart car. The other cable connects to the jumpstart car negative battery connector and the bettle minus battery connector. It is important to let the donor car charge the Bettle battery for ten to fiftenn minutes because most jumper cables are poor quality and size to immediately supply all the current to the Bettle starter by themselves. Give the Bettle battery a while to charge and let it help the cranking process.
Jumpstart a car?
How_do_you_jump_start_a_carthis is how you jumpstart a car.
How can you make a car without a battery move?
If your car has a battery and it's dead, you can call a friend who has some jumper cables. You can hook the jumper cables up to his battery and your car's battery. It should create electricity that will renew your battery. If your car does not have a battery, you would have to push it or get it towed.
Why would a car stall after you take the jumper cables off after starting it?
Alternator is defective.
