You will need to change the gearbox, swing arm, back wheel and, probably, brake arrangement and shocks.
In 1910 the Belgian arms company ' Fabrique National ' known as FN made the first 4 cylinder motorcycle with shaft drive. There were bicycles using shafts in the 1830's but this is the earliest motorcycle I know of.
Yes, it depends on what type of shaft it is to determine how your going to tackle the job.
Your question makes no sense. Yes a drive shaft in a car came in 1898 which was the 19th century but the first drive shaft on a motorcycle of any kind came in 1923 which is the 20th century. So no manufactures US or other had a shaft driven bike in the 19th century. The first 70 or so years that a drive shaft was offed on a motorcycle they had a horrible issue of lifting the back of the motorcycle up when under moderate to heavy acceleration. This caused a traction issue when is not a good issue to have when you only have 2 tires.
how to remove a drive shaft on a fiat doblo
No you do not.
there is no oil tank on a Vmax motorcycle. The only oil is in the crank case, and the shaft drive.
If there's no chain it's a shaft drive.
Yes there is, otherwise it would not be able to drive. The transmission is the gears, the chain and the sprocket. Some motorcycles have a drive shaft instead of a chain.
ring on drive shaft with senser next to it. usual fault! cracked by rust ring on drive shaft. change shaft.
You can but you will have to change or alter the drive shaft also.
The transmission oil is the engine oil it also has a liquid clutch (same oil). If you have a drive shaft you should change it's oil as well but with gear oil. hope this helps