If it blows when trying to crank, the starter has failed.
If it blows every time you try to crank the engine over, the starter may have failed.If it blows every time you try to crank the engine over, the starter may have failed.
If it blows when trying to crank the engine, the starter is probably the failure.
Depends upon the equipment it is on. However you can locate it by starting ant the + battery connection and tracing it to the engine somewhere in the trace you will find it.
Not enough information. WHICH fuse blows out???
No, there is no fuse for the crank sensor
A fuse blows when there is a short circuit or an overload in the circuit.
So that the live wire is isolated when the fuse blows. If a fuse was placed in the neutral, the equipment would still be live when the fuse blows.
96 ford contour blows fuse link in reverse
model: 28n777 type:1178-E1 code: 020108ZE Briggs & Stratton Yard Machines by MTD 14 HP, and I need to know where Ican find the fuse on this mower...we have followed all the previous instructions tht you have posted and we cant seem to even spot a fuse. We have checked everywhere from the back of the mower all the way up to the ignition, which includes under the gear column? We have done everything, replaced all electrical parts, and stillcannot get it to run. Cant even get it to crank.
A fuse blows when the current draw of the circuit is greater than the capacity of the fuse.
uyk