If you have an old desktop that you are no longer using, then you can use it to create a light table. If you don't have an old desktop and are on a budget, then find an old box, or create one yourself with wood. If you happen to have plexi lying around from previous projects, then definitely use it for this project. Since plexi can get pricey, you can swap it out with a white piece of plastic in order to diffuse the light. You will also need a large piece of glass (check out your local dump), fluorescent lights, extension cord, tape, and glue. If you are creating your own box, you will also need wood, a hammer, and nails.
Building the Light BoxTo begin the project, take the pieces of wood and nail them together to give the box a sturdy foundation. Next, it is recommended that you drill ventilation holes in back of the box so that the box doesn't over heat. Attach light fixtures to the bottom of the box, which is parallel to the opening where the plexiglass will be placed. Once the light fixtures are firmly in place, wiring the fixtures to a light switch on the outside of the box would be the next step. Once the lights are working, it is now time to put the plexiglass on for the finishing touch by gluing the glass on the box.
Light Box Or Light TableThere are two options on how you stand the box up. One way you can stand the box up is to put rubber feet on the base of the box and just have it simply raised off the ground just about an inch or so. The other option is to make the light box into a light table. In this case, the box would have legs or place on a swivel to create a larger backlit work space.
A cheap way to build a photo light box from home is to simply use a cardboard box. One side of the box can be left open and the other sides can be cut and covered with different materials for lighting.
get a box. get a light bulb. the temperature=99 derees F humidity=50-60
If it has a glove box light the light will be located inside the glove box. Just look and see if there is one.
laser light build
Go to jlaudio.com for box desine
tstomp.altervista.org
That depends on which type of owl that is.
tge date of the making of the light build was 2100 tge date of the making of the light build was 2100
you quickscope it and kill it then u give it your home (box) and put a roof on it
When you purchase a Build-A-Bear at the stores, they put the friend in a box automatically, or they ask if you want a box.
Just build a Cigar box guitar. You can find full plans at www.cigarboxnation.com
A soft box is a 5 sided box made of white cloth. A light is placed behind it facing into the box. ( all of this is just outside of camera view) The subject matter is on the other side of the box. The light shining through the box is defused by the cloth making it appear as soft light on the subject. ( No hard shadows.) This is often called "Window light."