You have 2x6 x12 floor joists in your house how could you fix bounce in floor?

Will hanging an 80lb punching bag from floor joints in the basement damage the house?

No a punching bag supended from the floor joists in a typical house will not have any major effect. Some vibrations will be heard and felt on the 1st floor.

What cause uneven flooring on the second floor of a house?

The structure is "sagging" the floor joists have been installed the wrong way lousy construction practice poor design

How do you define capentry?

Carpentry is building of a structure or item with wood. Carpenters build walls in a house as well as lay floor joists and window frames.

Can you bounce a bouncy ball in a bounce house?

Yes, you can bounce a bouncy ball in a bounce house. The inflated floor and walls of a bounce house provide a soft and springy surface that is ideal for bouncing a ball. Just be cautious of others around you and ensure the ball is suitable for indoor use.

What is cost of replacing the floor joists under the crawl space with hardwood floors in the house?

The job is difficult, very uncomfortable, strenuous, and time consuming. All the nails attaching sub-floor and hardwood floor to the joist will have to be cut, the joist cut out two at a time, and then new, full-length joists installed in place. Depending on the year the house was built, this can be almost impossible to do as they will have to be position diagonally and then forced perpendicular to the direction of the floor. Once the new joists are positioned and supported on either end, the task of re-attaching the floor to the joists is undertaken. This will have to be done precisely and skillfully from underneath without allowing the fasteners (screws) to puncture through the floor into the living space. Pre-applying construction adhesive to the top of the joists is effective, but adds another difficult step to the installation (all while in the crawl space). I operate in New England and would charge $60.00/hr for the un-pleasure of this job. Of course the size of the room dictates the length of the job, but you could count on $2500.00 in labor plus materials.

Why does upstairs shake when walking?

The shaking or vibrations felt upstairs when walking downstairs can be due to the impact and weight distribution of the individual on the stairs. The force generated when each step is taken can travel through the structure of the building, leading to vibrations being felt in different areas. Additionally, the construction and materials used in the building can also impact how vibrations are transmitted.

What is the cost to replace a rim joist?

In a typical home, the surface flooring (such as wood, carpet or vinyl) rests on a subfloor, which rests on joists -- a series of closely spaced parallel beams that support the floor or ceiling loads. Joists are usually supported by a sill (a long horizontal timber that's the lowest part of the framework and rests on the foundation) or a girder (a large beam that's the main support of the building). When replacing rotted floor joists it's important to be sure the girder and sill are still intact.Typical costs:If only a few joists are rotted primarily at the bottom, they can be repaired using a process known as "sistering" -- after the rot is cleaned away and the timber treated to prevent more problems, a new joist is laid beside the old one and fastened to it. Total costs will depend on the extent of the damage and the ease of access to the joists (through a basement or crawlspace), but in general sistering averages $100 -$300 or more per joist, and could run $1,000 -$3,000or more to repair a tilted, wavy or bouncy floor under an average room.If the floor joists are extensively damaged, it will be necessary to support the house with jacks while the joists are removed and replaced. In many cases, the sill may also be rotted and need replacing. Costs can run $10,000 -$30,000 or more for a typical home, depending on its size, the extent of the extent of the damage and the ease of access to install jacks and replace the timbers. If the damage is limited to just one section of floor joists, the project could run $5,000-$10,000.What should be included:Joists carry the weight of walls, furniture, people, appliances and anything else placed on the flooring they support. Usually wooden floor joists are 2"x8", 2"x10" or 2"x12" timbers -- their size depends on their length, the amount of "load" they're designed to carry and the building codes in effect when the house was constructed. The Family Handyman explains how joists work.If there is sufficient access through a basement or crawlspace, floor joists can be repaired or replaced without significant impact on the rest of the house. However, if there is limited access, all furniture and appliances must be removed from the affected area and the flooring and subfloor torn out. The Family Handyman explains how to "sister" damaged joists and HammerZone.com describes using a jack to raise a slightly sagging floor.Additional costs:Floor joists can be damaged by boring insects such as termites or extended exposure to water. Before you replace damaged floor joists, you must exterminate the insects or improve the drainage and ventilation so the problem won't reoccur. Costs will vary widely depending on the extent and nature of the original problem.Typically floor joists are repaired or replaced working from below, in a basement or crawl space. But if there's limited access to the joists, it may be necessary to work from above, removing the flooring and subflooring to repair or replace any damaged floor joists. Costs will depend on the extent of the damage and the type of replacement subflooring and flooring chosen.

How much weight can your floor hold?

The weight a floor can hold depends on the materials used, the construction of the floor, and any weight limitations specified by building codes. It is advisable to consult a structural engineer to determine the weight limit for your specific floor.

How strong is the floor upstairs?

This depends of course on the individual house. If the house is fairly modern and built to the correct standards within the last say, 30 years then it will have at least 6'' by 2" ceilings joists and 3/4'' floor boards over them. The joists span over onto the adjacent walls and are spaced every 400mm. They are strong as you are likely to need them. When you see people and baths etc falling through ceilings on TV, this is just for entertainment value. Some very old houses may have used smaller sized joists but I've yet to see a ceilings struggle under weight nevermind collapse.

How do you level the floor on a house built in the 40s if it seems to be too low in the middle of the house?

It depends on what is causing the floor to be low. Rot, bad construction, overloading, shift in foundation. Without knowing the cause it is hard to know the remedy, Simple answer is jack it back up with 1, 2, 3, support posts under a beam that goes across the affected floor joists. If you do not have a fair amount of knowledge of construction, I would sugest that you have a professional do it. To just jack up one section of the floor/house, it should not be overly expensive.

Is bounce-house a noun?

Yes, "bounce-house" is a noun. It refers to an inflatable structure typically used for children's entertainment, where they can jump and play.

What is the average cost for bounce house rentals?

The average cost for a standard bouncy house rental varies depending on where in the country (or even the state) you are located in. As a reference, the average price for a bounce house in N. Texas is $160. Again, this is for a standard square bounce house that does not offer a slide, obstacle, or interactive option.