answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Will shortening your bow cables shorten your draw length?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What length of string is used on a bear whitetail 2 The bow says 30 draw length 70 lb draw weight and 38 amo compound string length the cables are still there but main shooting string is missing?

38"


How do you adjust a draw length on a bear whitetail hunter bow?

On my Bear Whitetail Hunter there are 3 slots on both the top and bottom pulleys that the cable sits in. One center, and on either side the others are marked with a plus or minus. It is my understanding that you need to put the bow in a press and move the cable position to the desired slots (plus to lengthen, minus to shorten). I am in the process of shortening the draw length of my own. As far as the range of length adjustment or whether both pulleys need to be in the same slots I am not sure. Hope that this helps somewhat. Happy shooting. Jake.


How strong is 30'' draw weight?

30" is not a draw weight, it is a draw length. It is the length of the draw from the bow to the string when the bow is drawn.


What does MP mean on draw length of bow?

It stands for Multiple draw lengths. You can change the draw length, but you have to provide the modules to do so.


What is the string length of an xi impulse bow with a 28 to 30 draw length?

Impulse XI 53 7/16 on a 28-30 draw length 56 3/8 on a 30-32 draw length


Instructions on draw length of a browning bow?

I have a 1989 Browning Accelerator Plus and I was wanting to adjust the draw length?


Are battery cables supposed to be hot?

Battery cables are not supposed to be hot. Cables may become hot if there is too large of an amp draw, meaning there is a problem that needs attention. yes yes


How do you shorten blinds?

What kind of blinds and which direction. Mini blinds. In width, draw the blind all the way up, hold tightly, and a hacksaw can be used to cut the ends. A power miter saw can be used if you hold the blind VERY tight and go VERY slow on the cut. If not experienced I would use the hacksaw. You can only shorten them by about 2 inches in width. In length, the bottom rail come off, shorten how ever much needed and reinstall the the bottom.


How many fps does draw length increase your bow?

The general rule of thumb is that one inch of draw length will increase your speed by approximately 10 fps. This will vary from bow to bow and depends a lot on the draw length and poundage being changed.


What is the string and cable length on a jennings buckmaster 2000 with a 29 inch draw length?

String is 98.5 and cable is 41.5 It varies by draw length, this is for 28" draw


When you buy new limbs for a bow does the draw length get longer?

No, it onley gets longer if u change the draw length. Unless you get the wrong kind of limbs.


How do you draw an arc with a given length and known radius?

The length of an arc equals he angle (in radians) times the radius. Divide the length by the radius, and that gives you the ange. Measure out the angle on a protractor and draw the length of the radius at the begining and end of the angle. Then draw theportion of the circle with its center at the location ofthe angle and extending out to the radius.