Start with 3 qts and add more if needed. I don't remember exactly how much they take, but its not much. 1992 TOYOTA PASEO 1.5L 4-cyl Engine Code 5E-FE
As to the Oil Filter it calls for this one.
Wix # 51394
Gasket Diameters
O.D: 2.475
I.D: 2.173
Thk: 0.233
Length: 2.977
This one will fit it's just about 1/2 inch longer with will get you a little more oil.
Wix # 51396
Gasket Diameters
O.D: 2.475
I.D: 2.173
Thk: 0.233
Length: 3.402
CAPACITIES
Engine, with filter..........3.4 quarts[1]
Cooling System, Initial Fill..........5.3 quarts
Automatic Transmission, Initial Fill..........3.3 quarts[2]
Automatic Transmission, Total Fill..........7.6 quarts
Manual Transmission, ..........4.9 pints
1. After refill check oil level.
2. With ENG at operating temperature, shift through all gears. Check fluid level in PARK and add fluid as needed.
TORQUES
Oil Drain Plug.....18 ft-lbs
Manual Transmission
Fill Plug.....29 ft-lbs
Drain Plug.....29 ft-lbs
Hope This Helps.
A 2001 Mazda Protege will hold approximately 4.5 quarts of oil. The recommended oil type is 10 W 30. This oil can be purchased at any auto parts store.
The cost to replace a 1999 Mazda Protege serpentine belt will vary depending on the cost of parts and cost of labor. The prices for the serpentine belt start at $14.56.
around 4.5 qts and mostly people use 10w30.
I just replaced my fan belts on a 2002 Mazda Protege. It came out to a little over $200. I took my car to a Mazda dealership.
My local VIP shop in Yarmouth, Maine, wants $540! Claims they need to shape the line and it takes seven hours.... I have a 1999 Protege.
2.5 quarters
It can run between $160 and $250+ to replace the clutch on this car. It depends on the part price, and the charges for the person replacing the clutch.
how much does it cost to replace to egr valve on the 2002 mazda protege
if is bank 1 it will it the 1000 from the dealer because is a direc fit but if is bank 2 could be 200 or 250 and any muffler shop can replace it
I just replaced a wheel bearing in my, 03 protege 5 it was $60 for the part and $60 for the mechanic to press it in.
3.5 0r 3.7 qts i would start with 3.5
base model and DX have 103 HP. LX model has 125