answersLogoWhite

0

Looking between the gear box assembly (metal housing) and the top of the trimmer head, locate a u-shaped slot found on either side of the gear box assembly. If you rotate the trimmer head slowly while looking into that slot you will see a mating u-shaped cutout. Place a screwdriver, Allen wrench or anything that will prevent the internal mechanics from rotating. Now turn the trimmer head counterclockwise and it will unscrew from the gear box shaft.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do I replace the string on my Ryobi string trimmer?

To replace the string on your Ryobi string trimmer, first turn off the trimmer and disconnect the spark plug. Then, remove the spool housing and take out the old string. Cut a new piece of string to the appropriate length and feed it through the trimmer head. Wind the string in the direction indicated on the spool and secure the ends. Finally, reassemble the trimmer and test it before use.


How can I extend the string on a Ryobi trimmer?

To extend the string on a Ryobi trimmer, you need to follow these steps: Turn off the trimmer and disconnect it from the power source. Locate the trimmer head and remove the spool cover. Take out the old string and cut a new piece to the appropriate length. Insert the new string into the trimmer head following the arrows for the correct direction. Wind the string evenly and securely onto the spool. Reassemble the trimmer head and spool cover. Test the trimmer to ensure the string is working properly.


How do I remove the Ryobi trimmer head from my trimmer?

To remove the Ryobi trimmer head from your trimmer, you typically need to unscrew the trimmer head by turning it counterclockwise. This will allow you to detach the head from the trimmer and replace it if needed.


How can I replace the trimmer head on my Ryobi Expand-It trimmer?

To replace the trimmer head on your Ryobi Expand-It trimmer, first, remove the old trimmer head by unscrewing it. Then, attach the new trimmer head by screwing it on securely. Make sure to follow the manufacturer's instructions for proper installation.


How can I restring a Ryobi string trimmer?

To restring a Ryobi string trimmer, first remove the spool from the trimmer head. Cut a length of new trimmer line, thread it through the holes in the spool, and wind it evenly around the spool. Reinsert the spool into the trimmer head, and feed the line through the trimmer head eyelets. Finally, secure the spool back in place and trim any excess line.


What is the best method for replacing the weed trimmer line on a string trimmer?

To replace the weed trimmer line on a string trimmer, follow these steps: Turn off the trimmer and disconnect the power source. Remove the spool housing by pressing the tabs or unscrewing the cap. Take out the old line and cut a new piece to the appropriate length. Insert the new line into the trimmer head following the arrows for the correct direction. Reassemble the spool housing and test the trimmer.


How can I unlock the Ryobi trimmer head?

To unlock the Ryobi trimmer head, locate the button on the trimmer head and press it while turning the head counterclockwise. This will release the head and allow you to remove or replace it as needed.


How do you wind trimming cord for an electric string trimmer?

I've only had gas trimmers but all trimmers should be the same, wind the string in the opposite direction the trimmer head spins. If the head spins cloakwise then wrap the string counter-cloakwise.


How can I replace a line in a Ryobi trimmer head?

To replace a line in a Ryobi trimmer head, first, remove the spool from the trimmer head. Then, unwind any remaining line and clean the spool. Cut a new piece of trimmer line to the appropriate length and insert it into the spool, following the arrows for the correct winding direction. Finally, reassemble the spool back into the trimmer head.


How do I open the weed eater head to replace the trimmer line?

To open the weed eater head to replace the trimmer line, first, locate the tabs on the side of the head. Press and hold these tabs while twisting the head counterclockwise to unlock it. Once unlocked, carefully remove the head to access the spool and replace the trimmer line.


What do I do since the string came out of weed trimmer all at one time.?

make sure head is on properly and that the spring that forces the head to shut once depressed is in place. That is like 52 card pickup. Unplug the trimmer. Then pop out the cartridge and rewind the string (you don't have to do a perfect job of it) and replace the cartridge as if it is new. Then plug in the trimmer and try again. Hopefully, it is just a matter of something unusual happening just once.


How do I replace the line on a Ryobi RY15523A trimmer?

To replace the line on a Ryobi RY15523A trimmer, follow these steps: Turn off the trimmer and disconnect the spark plug wire. Remove the spool from the trimmer head. Cut a length of replacement trimmer line. Insert the line into the trimmer head following the arrows for the correct direction. Wind the line evenly and tightly onto the spool. Reassemble the spool onto the trimmer head. Reconnect the spark plug wire and test the trimmer.