No, any mild source of heat can be used. A pan on low heat is a good way to melt a large number of crayons.
Yes
No, you cannot use a solder gun as a hot glue gun.No, you cannot use a solder gun as a hot glue gun.
Turn the glue gun on to loosen the glue, then, if the glue is persistent, use a wooden stick to CAREFULLY pick the glue off.
You could use the gun as a nozzle but nothing about its use as a hot glue gun would be useful in the role of flamethrower.
you have to use a hot glue gun.
No the tip is wrong.
Either use a hot glue gun or some super glue.
Use a hot glue gun.
ANS 2 - Hot glue will burn your nails or skin . Do not do this.
You can glue things faster and more easily with a glue gun than with a tube of glue (although I still use tubes, personally).
Yes, but super glue would be better.
No, but you will have to clean it out later and it will be a mess! If you want to melt crayons... try this... get two pieces of wax paper, use a hand pencil sharpener and shave some of the crayon between the two pieces of wax paper (use lots of colors) now place an old towel over the wax paper and use a clothes iron set to low and iron the towel (use an old piece of wood, larger than the wax paper, as a base for this task) after ironing for a while check your progress and iron some more, if necessary. See what happens, please use common sense about where and how you do this, but the results should please you and it is better than messing up the glue gun.