You have a 3ml syringe and need to give 0.05cc of insulin How much do i draw up in units?

If you use a 1 ml insulin syringe how many units would you draw up?

In a 1 mL insulin syringe, the markings typically represent units of insulin, not milliliters. The number of units you would draw up in a 1 mL insulin syringe depends on the concentration of the insulin you are using. Common insulin concentrations are 100 units/mL and 50 units/mL. If you are using insulin with a concentration of 100 units/mL and you want to draw up a certain number of units, you simply draw up that number of units on the syringe. For example, if you want to draw up 10 units of insulin, you would fill the syringe to the 10 unit mark on the syringe. If you are using insulin with a concentration of 50 units/mL, then each unit on the syringe represents 2 units of insulin. So, to draw up 10 units of insulin in this case, you would fill the syringe to the 5 unit mark. Always make sure to use the correct insulin concentration and syringe to accurately measure and administer your insulin dose. If you are unsure about the concentration or how to use the syringe, it's important to consult with a healthcare professional or pharmacist for guidance.

How do you draw 125 units on an insulin syringe?

you don't ever want to draw up 125 units of insulin to admiminster. This is a lethal dose and can cause death if given at one time

If using a tuberculin syringe instead of insulin syringe-how much insulin should i draw up?

Do not use a TB syringe for your insulin. The standard these days is for insulin to be 100 units per mL, which would seem to measure the same, but the syringes are calibrated differently and they are not always equivalent. There's a high likelihood you'll take too much or too little, and this deficit or excess can really add up if you're taking insulin a few times per day. If you're not sure, take your insulin and your syringes to your doctor, a local urgent care, or maybe a pharmacy and get help from a professional; it's too easy to overdose or underdose if you don't understand your medication.

What is 0.34 ml on a syringe?

0.34 ml on a syringe represents 34 units on the syringe's scale. To measure it, draw the plunger up until the liquid reaches the 0.34 ml mark on the syringe.

Can regular insulin and nph be mixed together?

Yes, regular insulin (short-acting) and NPH insulin (intermediate-acting) can be mixed together in the same syringe. However, it is important to follow proper mixing techniques and dosage guidelines as instructed by your healthcare provider to ensure accurate dosing and effectiveness of the insulin.

How do you inject insulin?

First, you must have the vile of insulin and a clean, sterile syringe that has not been used yet. Put the needle of the syringe in the hole of the insulin vile, and turn it upside down. Then, pull down on the moveable part of the syringe to the amount you want in the syringe. Then, take the syringe out of the vile, and set the vile down. Next, wipe the spot where you are going to inject the insulin into with an unused alcohol swab. Then, put the needle into the spot where you want to inject yourself, and then inject the insulin into your body. Then, take the needle back out of your body, and you have just injected insulin. ****** And before drawing insulin (or any other injection) you should wipe the top of the vial (the rubber part) thoroughly with a fresh alcohol swab. Use two things - TIME and FRICTION to try to remove as much bacteria from the stopper as you can. Do not touch the top with your finger - only the alcohol swab. This will help prevent your needle (sterile) from contaminating the contents of the bottle by picking up bacteria from the rubber stopper as you insert it through the stopper - and it will save contaminating you when you inject yourself! Don't forget to first inject the amount of air equivalent to the dose of insulin you will be withdrawing from the vial. If you are administering insulin per a sliding scale, calculate the dosage according to your pre-meal blood glucose reading using the sliding scale recommended by your health care professional. If you are administering a basal dose of a intermediate acting insulin like insulin isophane (NPH), or the very-long-acting insulins such as insulin detemir (Levemir) or insulin glargine (Lantus), follow the dosage your health care provider has recommended. Remember that you MUST use an INSULIN syringe only, as they are calibrated in "UNITS" not milliliters. NPH insulin (the cloudy insulin) can be mixed with other types of insulins EXCEPT FOR detemir and glargine. Insulin detemir (Levemir) and insulin glargine (Lantus) SHOULD NOT be mixed in the same syringe with ANY other drug or insulin. To mix two insulins, such as insulin aspart (Novolog) and insulin isophane (NPH) remember you must draw up the clear insulin first. So first, you roll the bottle of NPH (the CLOUDY insulin) to mix it. DO NOT SHAKE as this will instill air bubbles in the insulin! Then you fill the needle with the amount of air that is equal to the dose NPH (the CLOUDY insulin), and JUST INJECT THE AIR into the NPH vial (DO NOT draw the insulin at this time). Remove the needle, draw up the amount of air equal to the dose of the Novolog, and inject it into the vial of Novolog, then draw that amount of Novolog into the syringe. Now, REINSERT the needle into the NPH vial, (no need to inject any more air, we already did that!) and withdraw the dose of NPH. When finished, you should have ONE dose equivalent to the sum of both insulin doses. So for example, you have a basal dose of 5 units of NPH, and your sliding scale says at your blood glucose reading of 180, you should take 2 units (JUST AN EXAMPLE - *ALWAYS* follow the sliding scale given to you by YOUR health care provider!), then you would clean the top of the NPH vial with a swab, inject 5 units of air, then with a clean swab, clean the Novolog, inject 2 units of air, turn it over, careful to support the bottle so the needle does not bend, and draw 2 units of Novolog into the syringe. With the needle still in the vial, gently flick the needle if any air bubbles remain, until you have nothing but insulin in the syringe. The air won't hurt you, but it will displace the insulin, making the dose less than it should be. Then go back to the vial of NPH and withdraw the 5 units, for a total of 7 units in the syringe. You may wish to draw a tiny bit more NPH, and then flick the syringe to removed trapped air after removing it from the bottle. Gently squirt the tiny bit of extra insulin and air until you are at the 7 unit mark. Then you would be ready to inject the total at the chosen site, after cleaning the skin with another alcohol swab. There are also now insulin "pens" on the market now, with screw on tips that contain a shielded needle to prevent sticks, and some even have an indicator that shows when the dose was injected properly. However, these tend to be more expensive due to the cost of the needle tips in addition to the cost of the pen (insulin) itself. For use of the pens, it is best to consult a health care professional, pharmacist, or diabetes educator. ALWAYS check your insulin for expiration date - do not use insulin that is past date, as it may not work as expected. It is always best to seek advice from a health care professional or diabetes educator before beginning insulin injections for the first time. They can help with training and personalized advice to help take some of the pain out of taking your insulin shots.

How can you draw out the blood of a chicken?

syringe

You are to draw up 2.5 ml of diluent what size syringe should be used?

3ml syringe

When mixing regular and nph insulin which do you draw up first?

Draw up the regular insulin first. You always want to go from clear to cloudy. Also, you do not want the NPH insulin mixing into the regular insulin, therefore the regular insulin should be drawn up before the NPH (long-acting) insulin.

What is a 27 gauge syringe?

You insert it into a vein to draw blood.

How do you draw up 0.7 ml on a 3 ml syringe?

Pull the plunger of the syringe down to the 0.7 ml mark on the scale. Insert the needle into the liquid and slowly draw up the desired amount of 0.7 ml by gently pulling back on the plunger. Ensure no air bubbles are trapped in the syringe before administering the medication.

How would you draw up 0.18 ml in a 1 ml syringe?

To draw up 0.18 ml in a 1 ml syringe, you would pull the plunger to the 0.18 ml marking on the syringe barrel while making sure there are no air bubbles. Make sure to read the measurement at eye level for accuracy. If the syringe does not have a 0.18 ml marking, estimate between the closest incremental markings.