0
Which has a greater torque a perpendicular force applied at the end of a wrench handle or an equal force applied in the same direction near the middle of the handle?
Wiki User
∙ 11y ago
the perpendicular force applied at the end of a wrench handle. Because torque= Fd / T = F d cos θ
therefore the greater the distance the greater the torque.
T=torque
F=force
d=distance
cos=cosine
θ=theta
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is a damper in ac terminology?
A damper is usually a piece of metal that is installed in a duct to allow the airflow to be restricted. This lets the user open or close the restriction to adjust the amount of air getting through. There is often a metal tab handle outside the duct to rotate the damper inside the duct. The handle is parallel to the restriction plate, so the least resistance is when the handle is parallel to the duct itself. To restrict the airflow, turn the handle so that it is up to 90 degrees off from the direction of the duct.
What are the types of hacksaw handle?
file or straight handle, pistol grip handle and woodsaw handle
This part of the screwdriver acqts as a wheel to do the work?
The handle acts like that.
What is meant by the knock range of an engine?
It is the octane number range the distributor automatic spark advance can handle without the engine knocking.
Why is a pair of scissors a compound machine?
Scissors a compound machine because it's more than one simple machine.the handle is a lever and the blade is a wedge.
Does the hammer change the direction of the force?
No, the hammer does not change the direction of the force. The force exerted by the hammer is directed along its handle towards the point of impact, typically perpendicular to the surface being struck.
Which direction is 'on' for the water main valve?
Ball valves: The handle will be parallel to the pipe when on and perpendicular when off. Gate valve: Clockwise off, Counter-Clockwise on.
When a pencil sharpener is used which moves a greater distance the handle (wheel) or the sharpening mechanism (axle) which exerts greater force?
The handle (wheel) moves a greater distance than the sharpening mechanism (axle). The handle exerts greater force as it must overcome the resistance of the pencil being shaved and the friction in the sharpener.
Which way to turn handle on ball valve to open the valve?
The handle faces the direction of flow
Why is a wrench with a long handle more effective in turning a nut in comparison to a wrench with a short handle?
Because the long handle allows more leverage to be applied to the nut.
What class lever is a egg beater?
An egg beater is a third-class lever. The effort is applied at one end (the handle), the load is in the middle (the beaters), and the fulcrum is at the other end. This design allows for greater speed and efficiency when mixing ingredients.
Need an answer please - a 20 N force applied to the handle of a door produces a 44 N output force what is the ama of the handle?
2.2
How do you handle lack of direction strategic performance management?
control and be responsible
What is the function of ratchet handle?
to allow linear or rotary motion in one direction while preventing motion in opposite direction
Does One Direction from the X Factor have Skype?
No, the band One Direction does not have a Skype handle. The members of One Direction might have personal Skype handles, but they are not public.
How fluids handle pressure?
Fluids handle pressure by transmitting it evenly in all directions. This is due to the principle known as Pascal's Law, which states that pressure applied to a confined fluid is transmitted undiminished in every direction throughout the fluid. This allows fluids to exert force on the walls of their container and to flow from high pressure areas to low pressure areas.
How does a rake act as a machine by which the force is applied?
A rake acts as a simple machine by allowing a person to apply force to the handle, which then transfers that force to the end of the rake where the tines are. This allows the rake to gather and collect leaves, grass, or other debris efficiently by leveraging the force applied at the handle.
