0
Still curious? Ask our experts.
Chat with our AI personalities
Coach
Jordan
ProfessorAdd your answer:
Earn +20 pts
What is a kelly?
A kelly is a part of an oil rig.
What is rig saver in oil and gas wells?
Rigsaver is a swing-gate, spring-operated air shut-off device mounted in the air intake system. It will impede the airflow into the cylinders and positively stop the engine. It can be installed pre- or post-turbo. Rigsaver can be manually or automatically controlled to respond to a variety of fault or hazard conditions.
What is the function swivel in drilling rig?
the swivel has three functions: -to conduct drilling mud -to cease the rotary movement -to sustain
What is the half split technique?
half split technique is a fault finding method in which faulty area is compared with one of the similar What_is_the_half-split_fault_finding_techniquearea. in hydraulic rig, say if cylinder B is not working, we compare it against another working cylinder, say cylinder A. By comparing we collect data and determine the difference between both working and non working components.i.e. what is the status of incoming and out going flow in both (working and non working) components?are both pressurized only when it should?etc.AA
How do you properly use a clutch on a big rig so it will last?
Best way is to just float the gears - shift without using the clutch. However, if you do this wrong, you'll destroy your transmission. If you use the clutch when shifting, firstly, you double clutch - try shifting it like a car transmission, and you destroy the transmission. If you don't know how to do this, go to a truck driving school. When you shift, only push in the clutch far enough to disengage the transmission - don't go all the way to the floor with it, or else you'll wear out the clutch break. Don't roll out of gear with the clutch depressed.
