0
A weld log is a Quality Managment tool that acts as a database used to keep an ongoing record of welds made during construction fabrication type projects. The Weld log is used to record Important information recorded as "weld number" Welders Stencils", "Weld Procedure", "Weld Type" Material Type" "Project#" and any other important information to ensure the traceability and Quality Assurance of each welded junction during fabrication or repair activities.
The best example can be found here:
http://sites.Google.com/site/masterweldtracker/
What else can I help you with?
What is girth weld?
circumfrencial weld is sometimes referred to as Girth weld. its just another term.
Can you weld steel to steel?
Yes, you can weld steel to steel. You can use steel welding rod.
What is a weld symbol?
A weld symbol is the shape drawn on a Print to tell the welder: how to prepare a welding joint, what process can be used to weld (mig, tig, arc, etc) what filler rod to use, how wide and long the weld should be, how to deal with the weld after your done (grind flush, brush clean, or nothing) and a million other things.... Its a tool that design engineers use to communicate what the weld needs to be to meet their design specifications.
Why is it important to strike the arc only on the weld joint?
why is it important only to strike the arc in the weld joint
What is definition of the under run in filet weld?
A fillet weld in any single continuous weldmay underrun the nominal fillet weld size specified by2 mm [1/16 in] without correction, provided that theundersize portion of the weld does not exceed 10% of thelength of the weld. On the web-to-flange welds on girders,underrun shall be prohibited at the ends for a lengthequal to twice the width of the flange.
How close can one weld be to another weld?
Depends on what you are welding, but generaly welds can meet, or even weld on top of a weld.
Who is Theodore Weld?
Theodore Weld
Where is the Weld Public Library in Weld located?
The address of the Weld Public Library is: 25 Church Street, Weld, 04285 0120
Where is the Weld Historical Society in Weld Maine located?
The address of the Weld Historical Society is: Po Box 31, Weld, ME 04285-0031
What is the difference between butt weld and socket weld?
A butt weld is a weld made between two straight cut profiles , a socket , or plug weld is made between a surface and a hole.
When was WELD - AM - created?
WELD - AM - was created in 1956.
What is the past tense of weld?
The past tense of weld is welded.
What is the birth name of Bill Weld?
Bill Weld's birth name is William Floyd Weld.
What is the birth name of Tuesday Weld?
Tuesday Weld's birth name is Weld, Susan Ker.
What is girth weld?
circumfrencial weld is sometimes referred to as Girth weld. its just another term.
What is Seal weld in structures?
The seal weld in a structure is used a weld used for tightness. Specifically this type of weld is used for holding in liquids or gaseous materials.
How old is Tuesday Weld?
Tuesday Weld is 72 years old (born Susan Weld, August 27, 1943).
