35NCD16 is a french spec material number is 1.6773, equivalant spec is 36Ni CrMo16.
ASTM A105 is a Carbon Steel material spec used in forged fittings, such as 2000# or higher socket weld or threaded fittings, forged flanges, etc.. ASTM A197 is a Malleable iron material spec used in 150# socket weld or threaded fittings.
Q345R/SA 515 GR 60 Pressure Vessel Steel Plate The specification we supplied of the pressure vessel plate, as follows: -Material: GB 6654: 20R, 16MnR(Q345R) JIS G3115: SPV315, SPV355, SPV490 JIS G3127: SL2N, SL3N, SL5N, SL9N ASTM: A203, A662, A517, A537, A533 GB 3531: 16MnDR, 09MnNiDR Size: 6mm-100mm(150mm) * 1150mm-3700mm * 3000mm-18000mm Main Applications: They are widely applied to petroleume, chemistry, power station and boiler industries, and also can make reactor, heat exchanger, separator, spherical tank, the tank of oil gas, nuclear reactor pressure shell, drum boiler, liquified petroleume gas cylinder ( LP cylinder), high pressure water pipes of hydropower station, water turbin shell and other equipments or accessories.
Unlike the 300 series stainless 400 series stainless can be hardened by heat giving moderate corrosion resistance with more durability than 300 series stainless. It is commonly used in pump shafts for equipment requiring a higher torque spec than 316 SS can provide
A105 is a spec found on some types of carbon steel round bars. The term "ferritic" would not apply.Ferritic stainless steels contain larger amounts of Cr which stabilizes the ferritic phase. Ferritic stainless steels are highly corrosion resistant, but far less durable than austenitic grades and cannot be hardened by heat treatment. They contain between 10.5% and 27% chromium and very little nickel, if any. Typical applications may include appliances, automotive and architectural trim (i.e., decorative purposes), as the cheapest stainless steels are found in this family (type 409).
few websites i have searched have come back with a flywheel to crankshaft torque spec of 50 ft-lbs same goes for the flex plate in automatic models. pressure plate torque spec is 23 ft-lbs
yes
Q235a
35NCD16 is a french spec material number is 1.6773, equivalant spec is 36Ni CrMo16.
http://www.ipspipe.com/Documents/Spec/Pipe_pressure_rating.pdf
Kindly adviseSCH20 are suitable for 18" exhaust pipe urgently and are there any spec to justify if suitable on SCH20 instead of SCH40 pipe?
ASME spec for carbon steel weld caps compatible with SA106B pipe etc
whats the torque spec for the pressure plate on a 1998 kia sportage?
. -Most pumps actually have a GPM rating on spec. plate.
I am looking for same equivalent material spec............if you already got information, can you share?
No. It was the Navy's equivalent 'NAV SPEC WAR DEVGRU' formerly 'seal team 6'
All fasteners have a torque spec suggested by the manufacturer. You will find that information in the shop manual for the vehicle.