Difference between B and D tooling
D tooling
Barel Diameter is 1 inch
Head Diameter is 1 and ¼ th inch length is 5.25 inch
Dies outer diameter is 0.945 and
BB Tolling
Barel Diameter is 0.75 inch
Head Diameter is 1 inch length is 5.25 inch
Dies outer diameter is 30.16 mm
B tooling is same as BB only difference is that lower punch length is just 3 and 9/16th inch long.
D tooling dies and punches are usually have thick diameter or have greater diameter of their body as well as the tip of punches also dies have greater outer diameter compared to B type tolling which makes D type tolling dies and punches suitable for compression of big size tablets as the tip of the pinches is border compared to B tooling dues and punches.
Many sub categories like DB , BB type tablets dies and punches are made depending up on the punches and dies requirement of product.
Following table will be useful in understanding the concept of tablet tooling and how they are classified as B and D tooling and BB and DB tooling
Compression ignition is deisel. Otherwise, spark ignition is gasoline.
Reciprocating compressors are either single- or double-acting. In single-acting machines the compression takes place on only one side of the piston; double-acting machines use both sides of the cylinder for compression.
what is difference between lateral and longitudinal?
What is the Difference between technology innovation
What the difference between process piping and power piping?
the difference is a rarefaction needs vibration i believe i'mnot sure
compression zone is an positive zone,tension zone is an negative zone..
dddd
The difference in image quality between JPG 20 and JPG 100 compression levels is that JPG 20 has higher compression, resulting in lower image quality and more visible compression artifacts, while JPG 100 has lower compression, resulting in higher image quality with less visible compression artifacts.
AC3 is a digital 'audio compression' scheme. To understand the difference between AC3 and (enhanced) AC3 Plus, click the link: Audio Compression in the Related Links section below.
Compression ignition is deisel. Otherwise, spark ignition is gasoline.
y dnt u find it.....urslf
Lossless compression recreates a compressed file as an identical match to its original form. While lossy compression can't be used to compress anything that needs to be reproduced exactly.
f ′c: concrete compressive strength at 28 days (compression is negative) fcu: concrete crushing strength (compression is negative)
TIE is to be used for compression members and STIRRUP to be used for flexural members
B&S does not specify compression readings. Look for 120, give or take 20. More important than actual compression is the difference between the 2 cylinders.
150 psi per cylinder with +/- 20 psi difference between cylinders