0
Chalwyn valves can be attached to a diesel engine air intake system. The valve is designed to safely shutdown the engine in the event of external vapours or gasses being sucked into the engine through the air intake. In areas where there is a chance of vapour ignition a chalwyn valve will normally be specified by the site owner.
Add your answer:
Earn +20 pts
What is a valve grinder used for?
There are many things that a valve grinder is used for. Typically, a valve grinder is used for helping a fuel air mixture to come in and to exhaust the burned gasses.
What is SDV valve?
Shut Down Valve- used in ON/OFF position only.
Is gate valve used for throttling?
Never. Throttling will erode the valve seat and then the valve will never shut off completely.
Why is a throttling valve called an expansion valve?
It is not.. A globe , needle , ball valve are used for throttling For expansion either a shock absorber , diaphragm tank or air chamber are used to allow for expansion
Which valve is the preferred valve to use as flow control valve at the pump discharge 8 inch size ball valve can be used for the same application?
I would use a butterfly valve to set the flow and a pitot tube to measure it. Nexus Valve makes a good one and it is price competetive as well.
What is used to lock a valve spring on a valve?
A valve spring "keeper" or AKA a valve spring "retainer" is used to lock a valve spring to the valve.
What is a TIW valve used for in the oil field?
A TIW valve is a type of safety valve that is used in the oil field. This valve prevents a blow out when drilling for oil.
What is the difference between reflux valve and check valve?
A check valve allows for flow in one direction and a gate valve is used for positive shut off and a globe valve is used for throttling
A PCV valve is used to control the?
A PCV valve is used to control the air that enters the crankcase.
A ball valve is used for what?
A ball valve is used to turn water , gas or oil on and off.
What is a valve grinder used for?
There are many things that a valve grinder is used for. Typically, a valve grinder is used for helping a fuel air mixture to come in and to exhaust the burned gasses.
What is the name of the tool you used to remove the valve from the tire?
shredder valve.
What tool is used to install valve springs?
A valve spring compressor
In a two-stroke reed valve engine the reed valve is used to seal fuel in the?
In a two-stroke reed valve engine the reed valve is used to seal the fuel air mixture in the crankcase.
What is a sloan valve?
A sloan valve is a valve used for a toilet or sink. Unless you have a bathroom in you car there is no way you need a sloan valve for your vehicle.
What is the difference between a globe valve and a ball valve?
The Globe valves are generally used to control the flow rate and ball valve used for open /close purpose only.A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it.
What are the different types of artificial heart valve that can be used?
metal caley valve or plastic gimin valve
