You mean GLOBE valve and that would depend on the size of the valve and the maker
power beyond
cold chamber die casting machine can be divided into the direction of the direction of the flow of fluid in the hydraulic system used to control or regulate the pressure and flow valves, pressure valves and flow control valve three categories. A same shape as the valve, because of the different mechanisms of action have different functions. Pressure valve and flow valve with a throttle effect of the flow passage cross section to control the system pressure and flow direction valve replacement of the flow passage control the oil flow direction.
I would use a butterfly valve to set the flow and a pitot tube to measure it. Nexus Valve makes a good one and it is price competetive as well.
Never. Throttling will erode the valve seat and then the valve will never shut off completely.
Indicate inlet and exhaust valve clearances of Toyota 5k engine
5000 (5k) meters divided by 25 meters =200 lengths
"k", in this case, may mean "kilo", that is, "times thousand".
100 meters, mile(or 1500 or 1600), and 5k.
If you mean the Toyota gxl liteace with 5k engine, it is 1496 cc for the gasoline or petrol feed engine.
If both of them are accurately measured and marked, then yes.
Put it into two binomilals that multipy together to create the polynomial. For example: 5K(squared)-2k-7 is factored out as: (5k+1)(-7K+1)
You can get the float valve assembly for your Kawasaki KE 100 on Ebay.
5k-211 = -206
K is short for kilo, which means thousand, 5K is 5000.
They are asking if you rum 3.1 mile road races.
k is "kilometer" which is a metric unit of length. It's equal to 1000 meters.