What is the difference between a bar scale and a statement scale
Convert 240 k to the celsius scale
Wt is the formula to convert cgpa to percentage in 10 point scale
An 'A"
Statement scale refers to the scale expressed in terms of words. It describes the relation between the distance and time in forms of words expression Example: the bus travelled the distance of ten kilometres for thirty minutes.
1:50000 cm 1 cm=50000 divide by one humdred thousand.km 1 cm=0.5 km.
To convert a direct statement scale to an RF scale, you need to assign numerical values to the categories on the direct statement scale. For example, if your direct statement scale ranges from "strongly disagree" to "strongly agree," you can assign numerical values like 1 for "strongly disagree" and 5 for "strongly agree." Then, you can convert these numerical values to corresponding RF scale values.
To convert the direct statement scale to a representative fraction (RF) scale, you need to invert the ratio. In this case, the conversion would be 1:102922 (rounded to the nearest whole number). This means that 1 unit on the map represents 102,922 units on the ground.
To convert a direct statement scale to a linear scale, assign numerical values to the categories or statements on the direct statement scale. Then, plot these values on a linear scale, ensuring that the spacing between values is consistent to create a linear relationship between the categories or statements.
A RF scale is a measurement scale used in radio frequency technology to quantify signal strength and power levels. It is typically used to determine the strength of a radio signal in decibels (dB) relative to a reference level. A higher RF scale value indicates a stronger signal, while a lower value indicates a weaker signal.
A statement scale is a scale that makes a statement!! :) ;) :(
You need a RF modulator to convert the signal to a (RF) TV channel. The audio and video quality will be lower doing this.
What is the difference between a bar scale and a statement scale
RF Modulator - Convert video and stereo audio from an A/V component into a coaxial cable output Try radioshack.com
RF convertor. Radio shack.
1/16 convert to engineering scale, 1 divided by 16 = 0.0625" 0.0625" (architectural) divided by (12 in/feet) (to convert to engineering scale) = 0.0052" in engineering scale
Convert 240 k to the celsius scale