Put it on
2461m -38" 2462m - 38" 3252m - 42"
bladebelt diagram for john deere stx38 yellow deck
The regular deck on a 325 is 48" with three blades (You can only buy blades in sets of three from John Deere.) The standard blade is 16.6 inches in length.
Yes.
John Deere invented the polished steel plow in 1837 out of a broken sawmill blade.
They are metric bolts 8mm x 1.25 pitch and are hard to find anywhere but your local JOHN DEERE dealer.
Remove the mower deck. Block the blade from turning by using a piece of wood wedged between the blade and the mower deck. Loosen the nut on the top of the pulley (May require a cheater bar). Remove the pulley. If it doesn't come off easily, use a 3 armed pully remover. Once the pulley is removed, loosen the four self-tapping bolts that hold the spindle to the bottom of the deck and the spindle will fall loose. Remove the blade. Install the new spindle from below using NEW self-tapping bolts to bolt the new spindle to the deck. Replace the blade, install pulley, block blade from turning then tighten the top nut.
how to connect a john Deere 328 skid steer to a bobcat 7 pin dozer blade?
In 1837 John Deere a blacksmith made a plow out of a steel saw blade
crawler weighs 5840 lbs. plus blade or loader
John Deere's major, #1 idea was the polished steel plow. Made out of a discarded sawmill blade, John Deere's first plow gave hik him the reputation of a skilled craftsman whose products could stand up to the toughtest conditions. For the complete story on John Deere, give Deere & Company's website a try in the related link below...