If a horse swallowed hydrated lime, you should call a equine vet immediately as this is an emergency situation. Hydrated lime is highly caustic and toxic to both animals and humans, ingestion of the substance could be fatal if not seen to immediately.
The density of hydrated lime typically ranges from 550-640 kg/m³.
Hydrated Lime: Solubility in Water: Slightly soluble in water. pH=12.4@25°C
h
The chemical name for Hydrated lime is calcium hydroxide. The chemical formula is Ca(OH)2.
It can be both...
The density of hydrated lime is listed as 2.211 gm/cm3 .Doesn't matter whether you have a thimbleful or a truckload of it.
Hydrated lime is commonly used in concrete mixtures to improve workability and durability. By adding hydrated lime to the concrete mix, it can increase strength and reduce shrinkage and cracking. However, concrete made with hydrated lime alone is not as strong as traditional concrete mixtures with cement.
To check the pH of hydrated lime, you can use a pH meter or pH test strips. Mix a small amount of hydrated lime with distilled water to create a slurry, then insert the pH meter probe or dip the test strip into the slurry to measure the pH level. The ideal pH range for hydrated lime should be around 12-13.
No, hydrated lime is not a gas. It is a solid white powder composed of calcium hydroxide, which is produced by adding water to quicklime (calcium oxide). When hydrated lime is mixed with water, it forms a solution that is commonly used in various industrial and chemical processes.
The specific gravity of lime can vary depending on the type of lime (quicklime or hydrated lime) and its specific form (powder, granular, etc.). On average, the specific gravity of quicklime ranges from 2.2 to 3.1, while hydrated lime has a specific gravity typically between 2.2 to 2.4.
There are two common types of lime used in various applications: hydrated lime (calcium hydroxide) and quicklime (calcium oxide). Hydrated lime is typically used in water and wastewater treatment, construction, and agriculture. Quicklime is often used in steel manufacturing, soil stabilization, and as a component in mortar and plaster.