Many Yardman Lawnmower models do not have a drain plug. If no drain plug is found the oil has to be removed by the oil fill tube.
drain it.
The oil drain plug for the Craftsman 625 series lawnmower is located on the bottom of the mower, just above the blade. Tip the mower back. The plug is round and threaded with a square head. Using the square head of a ratchet extension, twist the plug counterclockwise and remove. The oil will start draining. Once it has drained, replace the plug and tighten clockwise until snug. Replace with new lawnmower oil or SAE-30 weight oil.
With the engine off and the plug wire off the spark plug, you will need to remove the drain plug on the bottom of the engine. Drain the oil, install the plug and fill with 30w oil.
where is the oil drain plug located on a john deere 316 riding mower?
drain your tank and flush with some gas. you should also remove the bowl from the carb. and drain it as well. Then clean out carb. with carb. cleaner. you may need to get a new gasket for the bowl as well.
take it to a john deere dealership
Plug under deck, square driver, remove this, drain oil remove oil filter install plug and new filter and add oil...
If the wrong oil is used in a lawnmower, do not start it. Simply drain the oil as completely as possible and fill with the proper oil.
The engine floods and you have to wait for the lawnmower to drain before you start it up again or it might start smoking.
There is none you suck the oil out with a pump provided by the dealer.
Where is the hydraulic fluid drain plug on a John Deere 7410 Tractor