Pierre Cardin hard shell luggage has a Fixed 3-point TSA combination lock. To set the lock, follow these instructions: youtu.be/HduFDF-2CX4?si=ZMhooWL96lMbYn5t
1. With the lock open, push button in the direction of the arrow and hold it in this position.2. Set number wheels to required combination.Release button
The locks come set to code 000. To open the lock, you push the tumb-button AWAY from the number set. With the lock OPEN, to re-assign the code, do this: 1. Push the thumb-button TOWARD the number set and hold it there. 2. Roll the number set to the desired code. 3. Release the thumb-button. You have just reset the code.
Samsonite luggage locks are similar to cheap locks on a gas cap and can be opened with a little time and patience. The only thing you will need for this project is a drill and a 1/8 inch drill bit. Place drill bit inside lock hole and apply plenty of pressure to cut the metal. Once you have reached the core of the lock hole it will disengage the locking mechanism.
If you have forgotten the code to your suitcase's combination lock, you can either use a hammer and screwdriver to disengage the latch, or if you have an immense amount of patience, you can set the dials to 0-0-0 and increment them, one digit at a time, until the lock opens. If you are quick and agile, you may be able to open the lock in ten to twenty minutes, however, if it is a four or five digit lock, it might take you several days to a week.
put the number code to 000 then press the button to the left and stick a key on the bottom of the lock and push it up and it will release the hook holding the grip.
Spin 3 times to the right until you get to your 1st number, spin to the left past your second number once then keep spinning until you get back to your 2nd number, then spin to the right until you get to the last number. then pull the lock to open. By Emma
If it is a school locker go to the office they have the combination. If it is lock you bought look on the bottom or side sometimes there is a reset button. If there isn't look at the brand and see if you can call them on how to open it. All else fails you will have to cut it open.
put the number code to 000 then press the button to the left and stick a key on the bottom of the lock and push it up and it will release the hook holding the grip.
1. Look for a small recessed button below (on the bottom side) the TSA key access. 2. Push in the button with a paper clip or pen. 3. While the button is pushed, change the combination to the desired numbers. 4. Then release the button and the combination has been reset.
u get the combination(3 #s) and do the combo. First turn right and match the number, then turn left twice and match the number, and then turn right and match the number. Then the lock should open. Hope this helps!
turn right 3 times put in first number turn left 1 complete circle then put in 2nd number then turn right and go to 3rd number but don't make a full circle and make sure there are the right numbers