Yes they can, they did on me.
When you get a chipped tooth the Dentist will gentley file it smooth again. So theres really nothing to worry about
all u need to do is use a pipe wrench, works like a charm! weld a nut to it that works the best, have done it many times Hammer and chisel also works well. ANSWER hammer and chisel
Engraving is basically carving in metal. An engraver uses a small chisel and hammer to cut lines into the steel of the gun. High quality engraving is done by hand, not by machine, and is done freehand- no mechanical guides.
Checkering is cutting or carving very thin parallel lines into the wood. This is done with a very fine chisel blade, called a checkering tool.
If your car or vehicle has a broken tire belt you need to replace it. This broken item can cause a very bad accident.
The reader is not told.
Cowboys loved a colorful phrase! This meant done at full speed, with everything you've got. You could also say full drive.
Heres how i eventually did it ... 1. Using needle nose locking pliers i held the pipe to the muffler so that it wouldnt get knocked back into the muffler. 2. Then using a cold chisel i made a gap between the muffler (the part that houses the pipe) and the pipe. I did this so that the pipe could be cut through without also cutting the muffler. 3. Then using a power saw with a metal cutting blade i cut through the tailpipe. 4. Then I was the able to crimp the edges of the pipe up and pull it out. 5. Have a beer for a job well done !!!
throw that thing away!
That cannot be done. If broken, the tire is useless.
Tune the car eg put a turbo in or get the engine chipped. Should provide more BHP thus meaning more power.