one electric meter two shoap in legal .
The unit of electric flux is Volt-meter or Newton-meter^2 Coulomb^-1.
No, an electric meter measures the amount of electric charge passing through a circuit per unit time. The number of protons in a current is not relevant to the measurement of electricity by an electric meter.
Cause there is ...
Only with the permission of your energy supplier which they are unlikely to give.
The unit of electric intensity is volts per meter (V/m). Electric intensity represents the electric field strength at a specific point in space and is measured in terms of volts per meter.
in a digital meter you get a digital value of your measurement. but in analog meter you have to check the position of the pin along the scale and find out the value.
find your electric Meter and you've found the point of entry, or depending on where the electric meter is in the building, you can trace the cable back from the meter to the point of entry.
It is not entirely clear to me what you are asking, however I will answer the question I think you want the answer for. When the electric company technician unplugs the old kilowatt hour meter that will disconnect the electric power from your house of business. When the electric company technician plugs in the new kilowatt hour meter that will reconnect the electric power to your house of business. For his own safety before switching the meters the electric company technician will probably disconnect the electric power from your house of business on the power pole or in the utility transformer box before beginning the work. So, yes you will have no electric power while this work is being done.
An ampere meter
yes put it in your friends' microwave oven on HIGH for about 3 seconds +/-2 Sec.. pull out with gloves and replace in to receptacle.
When upgrading from a 60 amp electrical service to a 100 amp service, you typically replace the electrical panel, the main service cable, and possibly the meter socket, as they need to be able to handle the higher amperage capacity. It is important to consult with a qualified electrician to ensure all components are upgraded correctly and safely.