0
Add your answer:
Earn +20 pts
Where are the input and output forces on a screw -?
The input force is you applying the ammount of force you will need to get the object to move. the output force is the object doing the work itself on other hands you do not have to do any work if there is 100% 0f out put force.
How do you eat corn in under 10 seconds?
attach it to a screw driver and then put it in your mouth while the screw driver is on high
What is force you apply to a simple machine?
Force put into a simple machine is a?
How can screw driver improve our lives?
A screw driver is really useful! It can really improve our lives a lot. Example When your home's screws have loosened, you can use a screw driver to tighten it for safety. You can put something on the wall with screws and you can tighten it up with a screw driver. This is why people call it Mr. Fixit. Really useful and important in our lives!
How do you bust an ignition?
Put a blade screw driver in and hit it with a hammer best way
Is screw driver one word or two?
two, two words put together
How do you replace the passenger window switch 1992 corvette?
Very careful pry it out with a small thin flat head screw driver, put tape on the screw driver to keep from scratching the surrounding area
How do you remove freeze plugs in a 2.5 liter Chrysler engine?
Tap them into the block then with long screw driver force it out of the block. Install the new one after you put sealer on it. use an installer so it does not get cocked in the hole.
1994 Legacy which is making a whining noise and a if you lift the bonnet there is a burning hot metal kind of smell around the power steering alternator?
It could be a bearing in your alternator that has gone out. Start your car and do whatever it takes to reproduce the sound. When the vehicle is making the sound, put a screw driver against your alternator and put your ear against the other side of the screw driver. If you hear the whining noice clearly through the screw driver, it's probly the alternator. Move the screw driver around the area and see if the noise that is passed through the screw driver is louder anywhere else, besides the alternator. If not, it's coming from your alternator. You can use a long screw driver or any solid piece of material, but the handle of a screw driver is a little more comfortable against your ear than other options.
How do you change a 1995 325 i BMW hood sign?
Get a screw driver & a rag. Wrap the rag around the screw driver & get it under the roundel (you may need something even skinnier to it up a little extra to fit in the screw driver)... With enough force you will pop it out of the grommets holding it in. Just don't go crazy, take your time. To get another roundel on you should get two new grommets (quite cheap) and put them on the replacement one. Line it up with the holes & start pushing.
How do you remove the cocking bolt from long strike cs-6?
Take a flat-head screw driver and put it between the bolt handle and the gun. Push down on the screw driver to push the bolt away from the gun.
How do you remove the front brake rotors on a 2002 KIA Spectra?
once the wheel is off you may see 2 screws those have to be removed before you get the rotor off, i suggest buying a impact screw driver ($20-30), put the right size bit on the driver and hit the back of the screw driver with a hammer while turning the screw driver counter clockwise if it doesnt come off you can hit it while turning the driver clockwise to help loosen the screw then clockwise once those are off the rotor comes out
