Your power may be off due to a power outage, a blown fuse, or a tripped circuit breaker. To get it restored quickly, check your circuit breaker or fuse box first. If that doesn't work, contact your utility company to report the outage and request assistance.
A transfer switch is used to transfer electricity or power from one source to another. It is often used with a generator when power is lost and needs to be quickly restored.
The opposite of a power cut is a power restoration, where electricity is restored after a period of outage or interruption.
You can instantly turn your 3DS off by holding the power button for 3 seconds.
The French Monarchy.
Charlemagne.
No metals do not cool off quickly.
The Emperors Justinian and Basil II
That is the correct spelling of "rechargeable" (able to have power or potential restored).
When the power goes off unexpectedly, stay calm and check if the outage is affecting your area or just your home. Use a flashlight for light and unplug sensitive electronics to prevent damage from power surges. Keep perishable food cold by keeping the refrigerator and freezer closed. Contact your utility company to report the outage and get updates on when power will be restored.
This is mostly due to the micro processor within the main power supply, the major cause for this is that the processor has had a power spike or brown out, the latter being the key culprit. The TV would have suffed a dramatic loss in power then the power is restored and often blows the micro processor.
The only way your electronics will work if you turn off the circuit breaker to the surge strip is if they are able to run on battery power. If the surge strip is connected to a UPS (uninterrupted power supply) as many commercial offices are, the electronics will stay operable until the circuit breaker is reset or turned back on if purposely turned off. If the utility service is off, the electronics will stay operable until the power is restored or the UPS power source fails.
A clock flashing 12:00 typically indicates that the time needs to be set. It could be due to a power outage, changing the batteries, or resetting the clock. It serves as a reminder to adjust the time to the correct setting.