a tin plate is tin and a plate, and stainless steel is stainless steel.
Stainless steel was invented in Sheffield
It's a misnomer. 4140 is a type of steel, which is NOT stainless.
Easy. A rod or electrode used in welding stainless steel. Or to "clad" a surface with stainless steel. (Nothing more than laying down a layer or layers of stainless.) MIG wire also comes in stainless steel. Their are different types of stainless steel and rods/wire/electrodes to use on them.
Per the attached related link, the density (hence weight) of stainless is slightly more than the mild carbon steel. Using about 8.03/7.84 ratio of density, for the same volume of material the stainless will weigh 2.4 % more.
AUS 8A is a Japanese stainless steel known for its corrosion resistance and toughness, while 440 stainless steel is a high-carbon stainless steel often used in knife blades due to its hardness and wear resistance. AUS 8A is easier to sharpen but may not hold an edge as well as 440 stainless steel.
The answer is yes and no. Depends what type of knife and its designated use. In general AUS8 or AUS-8A, which is alternate name form the maker to state "annealed" product is a decent stainless steel and works best for small/medium knives used for light cutting. In other words that is not a good steel for the large knives, swords etc. Made by Aichi steel (Japan), similar to AISI 440B steel. Exact chemical composition and comparison with 440B and other related info in the links.
AUS-8 steel can rust if not properly maintained due to its carbon content and lack of corrosion resistance compared to other stainless steels. Factors such as exposure to moisture, salts, and acidic environments can contribute to rusting on an AUS-8 blade. Regular cleaning, drying, and oiling can help prevent rust on AUS-8 steel.
Yep, you can weld steel to stainless and you can weld stainless to steel. You can use steel or stainless welding rod in either case but the steel or steel welding rod will of course rust.
Well, the answer lies in the question; by saying 'real' stainless steel, you are implying that there are fake metals which go under the name 'stainless steel', thus the difference is that the stainless steel in refigerators is actually stainless steel, and the fake stainless steel is not...thus your question is answered...
stainless steel
No, Stainless steel is not porous. Steel how ever is.
Steel and stainless steel tend to weigh around the same, however, stainless steel can sometimes be a bit lighter.
stainless steel
Stainless Steel 316, a type of stainless steel
Stainless steel
a tin plate is tin and a plate, and stainless steel is stainless steel.