Want this question answered?
Be notified when an answer is posted
There are two forms of sewing that use the name patchwork. The most common one is repairing tears in fabric by sewing a new piece of fabric over the tear. The other is called patchwork quilting, and it is done sewing various pieces of fabric together to form a large piece of fabric to make a finished product.
Tear-Stained Letter was created in 1983.
longitudinal axis: An axis along the lengthwise direction of the figure or body, usually passing through its center of gravity.
Tear ducts leak water, bodies are 90% water, water excreted is salty, the brain sends a message to the tear ducts when you are sad and the tear ducts clean themselves by releasing the fluids
Fabric
The warp of the fabric means the lengthwise threads in the fabric. The weft is the horizontal weavers of the fabric.
A grain of fabric refers to the direction of the threads in the fabric. Fabrics have three grains: lengthwise grain (parallel to the selvage edge), crosswise grain (perpendicular to the selvage edge), and bias grain (45-degree angle to the lengthwise or crosswise grain). Each grain behaves differently when fabric is cut or manipulated.
stitch and tear is a type of fabric structure used in textiles.
A lengthwise fold is when a material or fabric is folded from one end to the other, along its longest side. This creates a crease or fold parallel to the longest edges of the material. Lengthwise folds are commonly used in sewing and crafting to create neat and uniform folds in the material.
stitch n tear is a fabric used for applique
replace it
A crosswise fold is sometimes used to change the direction of the fabric's stretch and drape, providing a different effect in the final garment. It can also be used to align patterns or to work with the fabric's design or print in a specific way.
When you increase picks in fabric, the fabric becomes denser and stronger due to more yarns being interlaced in the fabric structure. This can also lead to better coverage and improved resistance to wear and tear. However, increasing picks can also result in a heavier and stiffer fabric with reduced drape and flexibility.
Azrael's Tear happened in 1996.
Tear-resistant?
The advantages of denim is Its strong and easy to clean.
The tensile strength of textile can be divided into three types: as for the woven fabric, one is tensile strength, most of fabric can reach this demand, if not, the development of this fabric is unsuccessful, can not be used to make clothing. The second is tear strength, tear the sample a hole first, then use the strength tester to tear the sample and test its sustainable strength, this is a key index and has much more substance. As for the knitted fabric, the index to check the fabric strength is bursting strength. The most relevant to the knitted fabric bursting strength are the yarn strength and fabric weight, if the fabric yarn strength is poor and the fabric weight is light, there will cause problems. The yarn fineness: as for the same material, the thicker the yarn, the better strength, so this fabric strength is higher. The yarn twist: in general, the yarn strength increase with twist, after reaching certain extent, the yarn strength decrease with twist, but it won't happen in general. The fabric density: generally speaking, the higher the fabric density, the more yarn dosage per unit area, so that the fabric strength is bigger. By YULONG FR tex