0
they were placed on wooden sledges and dragged along plank roads by gangs of slaves using ropes made from papyrus. Water or oil was poured on the runners to overcome friction.
Although the common theory is to simply deduce that the use of man power was in fact how the stones, weighing to to 100 tons, were drug along the sandy terrain and placed in stacks up to the top of a pyramid; it's simply not plausible. There have been many recreation attempts by scientists and scholars alike, yet the most nearing success was a recreation where the largest block transported was a meager 2.5 tons. Imitation with materials that are even better show how implausible man power was. Rather, it is more ideal to take into account how the Earth interacts with magnetic polarity. Edward Leedskalnin was able to construct a giant structure by himself that was made up of 1,100 tons of coral, including blocks that were up to 30 tons. By utilizing the polarity of iron and the magnetic properties of the Earth, a strike could line up atoms and drastically reduce the weight of a 30 ton block to allow feasible transportation. No matter how many people are tying papyrus and no matter how many tons of oil was poured on runners, 100 ton blocks cannot be pulled to the pinnacle of a scaling pyramid. Nowadays construction workers of the most superior scale have trouble moving anything near 100 tons. Although Leedskalnin passed away without giving up his secret, he did leave clues that it was all about polarity. Including his experiment that levitated a grid of copper, with the advancement of simplistic technology and anti-gravity of ancient civilizations, this was about the only possible explanation.
They carried the stones on wooden sledges dragged by gangs of slaves using ropes made from papyrus. For longer distances the stone was placed on barges made from reeds and floated down the river Nile.
people are not sure to this day. some believe that they used magnets in some way that made the stones that weighed tons weigh less. this is backed by a man in the united states who claimed to know their secrete but never shared it. he also was able to single handedly move very heavy stone/coral.
They dragged then on sledges hauled by gangs of slaves. They probably used trackways lined with planks. Water or oil was poured under the blades of the sledge to reduce friction. The number of slaves required depended on the size of the stone. For a pyramid stone weighing about 2.5 tons it is estimated that about twenty slaves were required. For an obelisk weighing about 120 tonnes the number increases to about a 1,000. For longer distances heavy stones were placed on barges and floated on the Nile. Transport to and from the river had to be done on a sledge hauled by slaves along a prepared causeway.
Add your answer:
Earn +20 pts
What was the technology of Ancient Egypt?
1.What technologies were used to build the Pyramid 2.Who were the ancient Egyptians 3.How did the Egyptians move the rock to build the Pyramid
How did Egyptions build pyramids?
The most accepted theory as how the Egyptians built the Pyramids is that they cut big limestone blocks with copper chisels and saws. Many men dragged them to the pyramid site and pushed the first layer of stones into place. Next, they built long ramps of earth and brick to drag up the next layer of stones. They continued this process until they made it to the top, finishing off the Pyramid.
How did Egyptians make the pyramid?
with a series of pulley's, they gathered rock and stacked it together to form a pyramid
How egptians move the stones to the top of th pyramid?
The Egyptians used a ramp. It was either a single strait ramp or a spiralling ramp that wound around the pyramid. The stone was placed on a sledge and dragged up the ramp by a gang of slaves.
How did they use an inclined plane in ancient history?
The early Egyptians used inclined planes to move heavy stones for the pyramids.
What was the technology of Ancient Egypt?
1.What technologies were used to build the Pyramid 2.Who were the ancient Egyptians 3.How did the Egyptians move the rock to build the Pyramid
How did Egyptions build pyramids?
The most accepted theory as how the Egyptians built the Pyramids is that they cut big limestone blocks with copper chisels and saws. Many men dragged them to the pyramid site and pushed the first layer of stones into place. Next, they built long ramps of earth and brick to drag up the next layer of stones. They continued this process until they made it to the top, finishing off the Pyramid.
How did Egyptians make the pyramid?
with a series of pulley's, they gathered rock and stacked it together to form a pyramid
How did the Egyptians move the blocks up each layer of the pyramid?
they carried them up with their muscles
Pyramid mixture of sand lime and water used as a lubricant to help move stones?
its stuff
Did the egyptians build Stonehenge?
Yes. They had the technical know how. They knew how to quarry, move, and erect large stones. They also had the knowledge of astronomy. And they were in Great Britain at the time mining the tin they needed to make bronze.
How egptians move the stones to the top of th pyramid?
The Egyptians used a ramp. It was either a single strait ramp or a spiralling ramp that wound around the pyramid. The stone was placed on a sledge and dragged up the ramp by a gang of slaves.
How do you think the Egyptians move the heavy stones needed for the great pyramid without the technology of the wheel?
Sledges, prepared causeways, ramps and lots of manpower. For a pyramid stone weighing about 2.5 tons it is estimated that about twenty slaves were required. It probable that the causeways and ramps were laid with planks and the blades of the sledges were lubricated with oil or water. For one of the 70 ton stones used in the construction of the King's Chamber perhaps 500. For longer distances the heavy stones were placed on barges and floated on the Nile.
How did they use an inclined plane in ancient history?
The early Egyptians used inclined planes to move heavy stones for the pyramids.
How do scientists think the egyptians moved the blocks that weighed tons to build the pyramids?
Scientists believe that the ancient Egyptians used a combination of sledges, ramps, and manpower to move the heavy blocks, possibly aided by water to reduce friction. Recent studies suggest they might have also used a lubricant like water or animal fat on the sand in front of the sledges to make them easier to pull.
What did the egyptians use to move water made out of sticks and stones?
They used vases since they already had this new technology called CLAY
What may been have used to help the Egyptians build the pyramids?
Stone chisels to carve the blocks of stone in the quarry Pounding tools (to pound on the chisels) Ramps Rollers (under the blocks of stone) or more likely wooden sleds to move the stones to the beginning of the ramp and up the ramp Lubrication to reduce friction as the stone was moved Barges to transport the stone from the quarry via the Nile Levers to move the stones into place
