answersLogoWhite

0


Best Answer

The Roman aqueducts brought water from the sources on the mountains to towns. Their length depended on the distance from the mountains to the town. The shortest aqueducts were just a few miles long. The city of Rome was supplied by 11 aqueducts with lengths ranging from 16.56 kilometres (10 miles 511 yards) to 91.423 kilometres (56 miles 1422 yards). The total length of this network was 475 kilometres (295 miles). The network of aqueducts which supplied Constantinople was a total of 250 kilometres (155 miles).

Most of the water conduits of the Roman aqueducts were underground. They were placed on bridgework when a valley or river needed to be crossed of when there was a need to keep a gradient in a flat area to keep the water flowing. When the bridges needed to be high, two or three tiers of arches were built on top of each other. The most remarkable surviving example are the Pont du Gard (near Nimes, southern France) which has three tiers of arches and is 48.8 m (160 ft.) high and was originally 360 m (1,180 ft.) long. The lowest tier of had 6 arches 22 m (72 ft.) high and is 142 m (466 ft.) long. The second tier had 11 arches 20 m (66 ft.) high and was 242 m (794 ft.) long. The top tier had 47 arches (only 35 survive) 7 m (23 ft.) high. Other impressive remains are the aqueduct of Valens in Constantinople (now Istanbul) which had 55 double arches and 17 single arches and was 29 (95 ft.) metre high and 971 metre (3185 ft.) long; the aqueduct of Segovia, Spain, which has a mixture of 75 single arches and 44 double arches followed by four single arches, and is 28.5 m (93 ft.) and 813 metre (2667 ft.) long; the les Ferreres Aqueduct, near Tarragona, Spain, had 11 larger lower arches and 25 smaller upper arches and.27 metre (88 ft.) high and 249 metre (816 ft.) long; the Aqueducto de los Miraglos, near Merida, Spain, which has 38 arched pillars and is 25 metres (82 ft.) high and 830 metres (2,720 ft.) long.

There are remains of the bridgework of only seven of the eleven aqueducts of the city of Rome. They total 59 kilometres (37 miles). Most of this network was underground conduits.

User Avatar

Wiki User

βˆ™ 10y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

βˆ™ 10y ago

Most Roman aqueducts fell out of use and in disrepair not very long after the end of Roman civilisation. However, some of them were repaired in the Middle Ages and beyond.

The first Roman aqueduct, the Aqua Appia, was built in 312 BC.

The Valens aqueduct in Constantinople (present day Istanbul), which was built under the emperors Valens (reigned 364-375), was repaired several times by Byzantine emperors until 1185. It still functioned at the end of the Byzantine Empire in 1453, albeit at a reduced capacity. Mehmet II, the Ottoman Turk Sultan who conquered Constantinople repaired the whole water system. It was repaired again by four other Sultans until the late 17th century.

In the 16th century, King Ferdinand and Queen Isabella rebuilt 36 arches of the aqueduct of Segovia, in Spain, which had been destroyed by the Moors in 1072. It was built under the reign of the emperor Domitian (81-96). In the 16th century, central niches with statues were added to the bridgework. This aqueduct was in use until the mid-19th century.

The Aqua Virgo, one of the 11 aqueducts of the city of Rome, was completed in 19 BC, during the reign of Augustus (27 BC-14 AD). It was repaired by Pope Adrian I in the 8th century. In the Roman days, after the reaching Pincian Hill, it was on bridgework, crossed the area of the present day Trevi Fountain ended at the Pantheon. These arches were later demolished. The rest of the aqueduct was restored and remodelled in 1453 by Pope Nicholas V who also increased its water flow by drawing water from new sources. Six other popes carried out further restoration work until the late 18th century. It was widened in 1840 and 1936 aand supplied water for the city centre. Due to soil pollution, it is no longer used for drinking water. Now it supplies water for the monumental fountains of the city centre: the Trevi Fountain, the Fontana della Barcaccia by the Spanish Steps, and the fountains in Navona Square.

This answer is:
User Avatar

User Avatar

Wiki User

βˆ™ 11y ago

Aqueducts were a various lengths. It all depended upon where the water was sourced and to where it was being piped.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How big were ancient roman aqueducts?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about General History

What did the ancient romans build to bring water to their cities?

The ancient Romans used aqueducts to bring water to their cities.


What were the ancient roman aqueducts made of?

aqueducts were made of a combination of stone, brick and a special volcanic cement


How ancient roman aqueducts work in the winter?

same as in the summer


Are aqueducts in rome or Greece?

Most ancient civilisations built aqueducts because of the importance of water. There were aqueducts both in Greece and Rome. The Roman aqueducts are more famous.


Where did Roman Aqueducts begin?

The ancient Roman aqueducts were a marvel in its day. In 312 BC BCE Appius Claudius built the first aqueduct bringing fresh water from mountain springs.

Related questions

Ancient roman water systems?

Aqueducts


What did the ancient romans build to bring water to their cities?

The ancient Romans used aqueducts to bring water to their cities.


Where can you purchase Roman aqueducts?

Roman aqueducts refers to the vast network of channels that were used to transport water in Ancient Rome. The aqueducts are national landmarks and are not available for purchase.


What ancient Roman writer is the source of knowledge on Rome's aqueducts?

Most of modern day knowledge concerning the aqueducts of ancient Rome comes from the writings of ancient Roman writer Sextus Julius Frontinus.


How ancient roman aqueducts work in the winter?

same as in the summer


What were the ancient roman aqueducts made of?

aqueducts were made of a combination of stone, brick and a special volcanic cement


Are aqueducts in rome or Greece?

Most ancient civilisations built aqueducts because of the importance of water. There were aqueducts both in Greece and Rome. The Roman aqueducts are more famous.


What were ancient roman aqueducts used for?

For the same purpose as all the aqueducts that came before the Romans; to transport water from one location to another, typically for the purposes of irrigation. Contrary to belief, aqueducts are not a Roman invention (they were in use long before the Romans came along). But they did improve the technology with their superior construction skills using stone and Roman concrete (which is a Roman invention, but one that we no longer use today).


Where did Roman Aqueducts begin?

The ancient Roman aqueducts were a marvel in its day. In 312 BC BCE Appius Claudius built the first aqueduct bringing fresh water from mountain springs.


How the ancient Roman aqueducts change people?

Roman aqueducts allowed people to live away from mountains and still have water they no longer needed to live next to or in river valleys. Aqueducts allowed cities to grow in that they had ample supplies of fresh water.


Which ancient Roman service required the use of many aqueducts?

The biggest consumers of water were the bathhouses.


How many aqueducts were built under the reign of ancient Roman Emperor Claudius?

By the time of Roman Emperor Claudius, Rome's population had been ever increasing. Claudius completed two aqueducts that the Emperor Caligula had begun before his untimely assassination.These were the aqueducts of Claudia and Novus.