When you stretch a spring, two main forces are acting on it: the restoring force exerted by the spring itself, trying to return to its original shape, and the external force applied to stretch the spring. These forces create tension within the spring until a new equilibrium is reached.
When you stretch a spring, the energy stored is potential energy from the work done to stretch the spring. This potential energy is then converted into kinetic energy when the spring is released and returns to its original position.
When you stretch a spring, it stores potential energy in the form of elastic potential energy. The spring will exert a restoring force trying to return to its original shape. The amount of force required to stretch the spring is directly proportional to the amount of deformation.
The extension of a spring depends on its stiffness, which is given by its spring constant. If the spring constant is known, you can use Hooke's Law (F = kx) to calculate the stretch of the spring. For example, if the spring constant is 100 N/m, a 1 kg weight would stretch the spring by 0.1 meters (10 cm).
If the spring is cut in half, its stiffness will increase and it will stretch less for the same load. The new stretch will depend on the new stiffness of the spring. Without knowing the exact stiffness of the original spring and the new one, it is difficult to determine the exact stretch without calculations.
When you pull on the scale you stretch the spring the pointer on the scales moves as you pull to measure the force you are using you have to be able to lift or pull on the spring scale
The force that causes a spring to stretch is called tensile force. This force is exerted when an external force is applied to the ends of the spring, causing it to elongate.
Yes, a spring will stretch when a weight is added to it due to the force of gravity acting on the weight, causing the spring to deform. The amount of stretch will depend on the weight added and the stiffness of the spring.
21
When you stretch a spring, the energy is stored as potential energy in the form of elastic potential energy. This potential energy is stored in the spring due to the deformation of its shape, and it is released when the spring returns to its original position.
As you stretch a spring, the force it exerts increases in direct proportion to the amount of stretch. This relationship is described by Hooke's Law. If the spring is stretched beyond its elastic limit, it may permanently deform and no longer obey Hooke's Law.
The maximum distance a spring can stretch depends on its design and material. Most springs can stretch within a few inches to a few feet before reaching their limit. Stretching a spring beyond this limit can permanently damage or break it.