0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you mix alkyd enamel with industrial alkyd for metals?
paint jobs
What is the best paint to use over a marble (cultured or natural) statue?
An enamel or alkyd.
Which one is costly alkyd paint or enamel paint?
They can be the same cost. Depends on brand
Can you paint alkyd satin enamel over oil-based semi-gloss enamel?
It won't adhere properly if you do. You'll find it peeling of almost as soon as it dries.
What is the difference between acrylic enamel and enamel?
Enamel paint is oil or alkyd. Alkyd paint is probably the most well known type of oil paint available on the market. The word alkyd actually refers to the synthetic resin used as a binder in the paint. This would be the oil in the paint, most commonly vegetable oil. Alkyd paints also come in a wide variety of finishes making it ideal for multiple different projects. Alkyd paint is very resistant to normal wear and tear. Thus, this type of paint is used commonly in "high traffic" type areas. This would include doors and trim within a home and also items that would need painting in the kitchen and bathroom such as cabinets. The alkyd paint will hold up to all the abuses that may come its way. Acrylic enamel is a water based full gloss usually for interior surfaces only. The gloss is nearly as high as gloss enamel but it is not quite as durable. One advantage is that if you are using white it does not discolor over time as much as alkyd based enamel. Also from a professional point i have never found the finish to be as good as enamel with less than three coats.
What are the ingredients for satin paint?
There are different kinds of satin paint - you'd have to know if it was latex, oil, enamel, alkyd etc.
What kind of paint can you put on alkyd enamel primer?
Alkyd Enamel is really old school primer. I personally would sand it with 400 wet/dry and put a coat or two of an epoxy primer over it then you can put just about any type of paint on it. If you don't want to do that, probably your best best would be n Enamel top coat , You can still get Automotive Enamels but they will be expensive because the EPA is really cracking down on the solvent based finishes. Color selection may also be limited but they are out there. And even if you use an enamel , you should clear coat it with a Urethane Clear. IT helps protect the base coat from fading and gives a great gloss when buffed. I have painted a lot of cars with Enamels and they go on fairly heavy so watch out.
What is Alkyd Primers?
Primer made with alkyd base.
What is the difference between alkyd latex and waterborne alkyd?
Traditionally, alkyds are found in solvent-based paints that must be reduced with paint thinner or mineral spirits. "Waterborne alkyd" is a generic term to refer to an alkyd resin that can be used in a water-thinnable paint. Because alkyds are not miscible with water, a chemical modification is sometimes used to produce a hybrid alkyd resin - often acrylic/alkyd or urethane/alkyd - that is compatible with water. These hybrids are often categorized generically under the term waterborne alkyds. A pure alkyd can be emulsified in water using appropriate surfactant combinations. This type of surfactant-stabilized alkyd emulsion has been sometimes referred to as an "alkyd latex." Different resin manufacturers use varying terminology to describe waterborne alkyds with the terms alkyd emulsion, alkyd dispersion, and alkyd latex being among the most common.
What do you use to thin out alkyd paint?
alkyd enamel..if spraying the best thing to use is naptha. flashes fast and gives the best shine. mix 8:4:1, 8 parts paint, 4 parts naptha, i part enamel hardener. you don't need the hardener, but it will cure much faster and be stronger and shine better. if your spraying in the sun or real hot weather, subsatute mineral spirts for the naptha. it will flash slower and give you time to keep the project wet for the last coat and avoid dry (dull) spots. you can do a mix of naptha and mineral spirts to get the right flash you need. if your brushing/rolling , use naptha.
Can an interior alkyd primer be used for priming decoys?
Yes, an interior alkyd primer can be used to prime decoys.
Can you paint enamel over latex?
Enamel is a word used to describe a finish, not the formulation of a paint. It simply means a hard reflective surface. Many people mistakenly use the word enamel when referring to oil based paints. So. if you are asking if you can paint latex or acrylic paint over a latex or acrylic enamel the answer is yes, however, I strongly recommend you sand the old paint first to give the top coat "tooth". If you are asking about painting latex or acrylic over an oil based paint the answer is still yes, however you must first sand the old paint and apply a good quality primer to it. Check with a reputable paint retailer for the best brand in your area.
