0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
When the helical compression spring is subjected to axial compressive force the type of induced in the spring wire is?
When a helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is primarily compressive stress. This stress is caused by the load that the spring is supporting, leading to a reduction in the length of the spring along its axial direction.
What are the important assumptions made in helical spring experiment?
Some important assumptions made in the helical spring experiment include: linear elasticity, uniform material properties throughout the spring, neglecting the effects of stress concentration at the ends of the spring, neglecting friction between the coils, and assuming that the load is applied along the axis of the spring.
Is bending stress is directly proportional to section modulus?
Yes, bending stress is directly proportional to the section modulus. A larger section modulus indicates that the cross-sectional shape of the member is better at resisting bending, leading to lower bending stress. Conversely, a smaller section modulus results in higher bending stress for the same applied bending moment.
What is allowable bending stress for en-8 shaft material?
allowable bending stress for en8
What is the allowable bending stress for EN-8 shaft material?
allowable bending stress for en8
Is bending stress and shear stress are same are not?
no
What is the allowable bending stress of aluminum plates?
The allowable bending stress of aluminum plates can vary depending on the grade and temper of the aluminum. Generally, it ranges from 10,000 to 30,000 pounds per square inch (psi) for commonly used aluminum alloys. It is important to consult specific material specifications to determine the precise allowable bending stress for a particular aluminum plate.
What is the difference between Bending and Direct Stress?
-> when a structural body gets deviated from its original position or from its centroidal axis due to externally applied load,then it is termed as BENDING->DIRECT STRESS is the stress which act normal to the plane-> stress and bending are the two different things. stress produced by load per area & bending is the effect produced by load and stress.
What is the difference between Bending STRESS and Direct Stress?
direct stress is a stress normal to the cross section, A, and is the result of an axial load, P. direct stress = P/A Bending stress also acts normal to the cross section but varies from tension on one side and compression on the other. and is the result of a bending moment, M. bending stress = Mc/I where I is the area moment of inertia and c the distance from outer fiber to neutral axis
What is caused by stress and the bending tiliting and breaking of rock?
Stress changes the shape or breaks (fractures) rocks whereas bending leads to folding
What is the bending of rock due to stress?
Folding
Is the bending of rocks layers due to stress?
Folding
