The normal range result of a pulse oximeter is 95% to 100%. Anything lower than that means there's not enough oxygen getting to your body. Saturation of peripheral oxygen (SpO2) tells the observer or clinician how much oxygen is dissolved in the blood of the subject under observation. And SpO2 is of vital interest as it can alert medical professionals to conditions underlying illness or disease in a patient.
95
It shouldn't. It is helpful to think of ventilation and oxygenation as separate processes. Ventilation (affected by respiratory rate and tidal volume) primarily affects carbon dioxide exchange, so hyperventilation will cause you to blow off more CO2 and therefore drop your partial pressure of carbon dioxide in the blood, resulting in a respiratory alkalosis. Oxygenation, on the other hand, is affected primarily by oxygen concerntration in the inspired air and pressure in the airways. Hyperventilation should not affect either, and so it should not affect your oxygen level.
Decreasing spo2 signifies - decreased efficiency of lungs to absorb enough oxygen, required to have normal gaseous exchange.
Yes
The normal SpO2 rate in the US is typically around 95-100%. This means that the blood is carrying a healthy amount of oxygen to the body's tissues. If SpO2 levels drop below 90%, it may indicate a potential breathing or circulation issue.
92%
SPO2 or pulse oximetry
Since the normal SpO2 max is ~98%, due to physiological demands/metabolism, it would be the accuracy of the equipment that produced a 100% reading. Typically, pulse oximitry has an accuracy of +/- 2%.
The CPAP machine itself does not control your SPO2 or oxygen saturation, so there is no part that controls this. Simplified, SPO2 is the amount of oxygen, expressed as a percent, found in the blood. Your optimal SPO2 is determined during your sleep study. The RT or Polysomnographer that performed your sleep study would adjust your pressure, measured in centimeters of water, to determine what decreases your apnea events while keeping your SPO2 as optimal as possible. This is called titrating. So essentially the oxygen saturation is controlled by the pressure setting that is determined by your physician as your therapeutic level or range. If by using a pulse ox monitor, you have determined that your SPO2 is dropping while using your CPAP machine, you should discuss these finding with your physician because a new sleep study may be required.
The saturation of oxygen is vital to your body, however the readings depend based on the reason you need to read the levels. The most convention method is the 'finger' reader which reads the percentage of Sp02 present. Anything in the upwards of 96%+ is great and should be expected, but there is no definite 'repositioning' required as most units do not require calibration.
blood pressure,pulse,breathihg,spo2