0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you make slim with glue water and Clorox?
first u start with a small bowl and add water then u add glue it would be perfect if u take a platic spoon and it will be the perfect amount of glue.finally you add flour and mix it u will get slim and add a 1-2 drops of food coloring it will take 5-6 hours
What are the steps for preparing and staining a wet mount slide?
Wet Mount Slide Steps1. Place a sample on the slide.2.Using a pipette, place a drop of water on the specimen. Then place on edge of the cover slip over the sample and carefully lower the cover slip into place using a toothpick or equivalent.*This method will help prevent air bubbles from being trapped under the cover slip. Your objective is to have sufficient water to fill the space between cover slip and slide. If there is too much water, the cover slip will slide around. Take a piece of paper towel and hold it close to one edge of the cover slip. This will draw out some water. If too dry, add a drop of water beside the cover slip. Practice this until you get used to it.Staining StepsPrepare a wet mount slide.Collect a drop of stain with an eye dropper or pipette.Put a drop of stain on an outer edge of your cover slide.Place a piece of napkin or paper towel against the opposite side of your cover slip, right up against the edge. This will help draw the stain under the cover and across the specimen.You may need to add another drop to ensure complete coverage.The slide is now ready for viewing.Source: Microscope.com
What happens when you add water to chalk?
Nothing will happen when you add water to chalk, because chalk does not dissolve in water. However, if you are drawing with chalk, as the water evaporates, it will allow the chalk to spread and create more fun.
Do I need to add anything besides water to a Dehumidifier?
Only water should be put into a dehumidifier. If you try to add anything else to it, you might end up ruining the dehumidifier.
Add salt to water and get pure water back?
you should distille the water ( heat the water so it evaporates and let it condensate into a cup or a mirror)
How can hardened plasticine be made soft?
Add water drops this will make it
How do you use sage extract for coughs?
you add a couple of drops in water and stir, then drink it
Why necessary to add a drop of water between the slide and the cover?
Adding a drop of water helps to reduce air bubbles and create a thin film of water, which provides a better surface for viewing specimens under the microscope. This also helps to prevent damage to the specimen and ensures clearer imaging.
Why can you fit more fresh water drops on a nickel then soapy water drops?
Fresh water has higher surface tension compared to soapy water, which allows the drops to hold together in a more compact shape on the nickel. Soapy water has lower surface tension due to the presence of surfactants, causing the drops to spread out more thinly on the surface.
How do you add color to a slide?
To be honest there are many ways to add color to a slide
How do you make slim with glue water and Clorox?
first u start with a small bowl and add water then u add glue it would be perfect if u take a platic spoon and it will be the perfect amount of glue.finally you add flour and mix it u will get slim and add a 1-2 drops of food coloring it will take 5-6 hours
How do you do a PowerPoint on volcanoes?
First start by creating the title slide which is the first slide that is there by default. Insert the title, which should be what your topic is about. Then under that in the subtitle area write your name.Then you can either go to insert and click new slide, or you can key ctrl + m. Insert either a picture of a volcano, and if you do add some information. Or you can type information without the picture. Add as many slides as you want. You can also add transitions to your slide.
Why is it important to be sure that no drops of water cling to the cylinder in the water displacement method?
It is important to ensure no drops of water cling to the cylinder in the water displacement method because any residual water droplets can lead to inaccurate volume measurements. This can affect the precision and reliability of the results obtained.
Why add water to a trangia meths burner?
Adding a few drops of water helps to prevent the black soot sticking to the bottom of your cookware. Don't add too much though!
What effects add pattern and texture to a slide background which add depth to a slide?
vagina
How can you disinfect water?
if it has bacteria in it, you take a coffee filter and strain it through there. then for every pint/quart if it looks clean, you add 2 drops of bleach. if it looks dirty, for every pint/quart add 4 drops.
What can you do if your playdo dries out?
Add 1 to 2 drops of warm water and rub it until it becomes moist again.
